See what suits your routine, what you might compromise on, and which alternatives are worth a look.
Lightweight local-media projector
A 640 g BenQ LED projector with native 858 × 600 resolution and a USB Reader for photo and movie files. The manual specifies an external power supply, not battery operation, and does not establish an ANSI brightness figure.
720p home cinema with optical zoom
A legacy BenQ home-theater model with native 1280 × 720 DLP imaging, 1.37× optical zoom, and HDMI plus analog video inputs. BenQ Korea's 2006 announcement lists 1,100 ANSI lumens; current lamp output and service availability remain unknown.
XGA presentation connections with long throw
A legacy DLP projector for presentation use with native 1024 × 768 XGA, a 1.93–2.16:1 throw ratio, and HDMI, VGA, and analog inputs. Vivitek lists 3,500 lumens without an ANSI label in the reviewed datasheet.
WXGA LED for a dark-room home setup
A Crenova home projector with native 1280 × 800 resolution, LED illumination, and 1080p input support. Its listed 44–200 inch range is manufacturer guidance; the upgraded-brightness wording is not an ANSI rating.
WXGA presentation with an ANSI rating
A lamp-based DLP projector for meetings and classrooms with native WXGA 1280 × 800, a stated 3,500 ANSI lumens, and 1.1× optical zoom. Its 1.54–1.71:1 throw calls for conventional room depth.
Exact model identified; specifications unverified
A supplier-platform listing supports the I Digital Galaxy DG-737 model identity, but no primary technical document was found. Native resolution, brightness, lens, connections, and power remain unknown, so this entry makes no feature-based recommendation.
Bright WXGA installation with lens shift
A professional DLP projector with native WXGA 1280 × 800, a typical 5,000 ANSI-lumen rating, and manual vertical lens shift. Its mercury lamp, conventional throw, network control, and dual HDMI suit measured fixed installations.
ANSI-rated SVGA with legacy inputs
A legacy BenQ presentation projector with native 800 × 600 SVGA, a 2,000 ANSI-lumen rating, and 1.15× manual zoom. Its VGA and analog video connections need checking against a current HDMI-only source.
XGA presentation projector with 3500 ANSI lumens
The InFocus IN3100-series sheet identifies the IN3104 with native XGA 1024 × 768 and up to 3500 ANSI lumens. It also documents HDMI, VGA, composite video, RS-232 and DisplayLink over mini-USB. Its lamp, conventional throw and legacy input mix make room measurement and unit condition more important than the headline rating.
Native Full HD with 4D keystone and dual-band Wi-Fi
YABER's Pro Y9 page identifies native 1920 × 1080 resolution, 4D/4P keystone adjustment, dual-band Wi-Fi and Bluetooth 5.0. The checked page does not establish an ANSI brightness figure, optical lens shift, throw ratio, battery operation or built-in streaming apps. The decision therefore turns on its documented native pixels and wireless setup claims, with room fit and light output left unresolved.
Compact external-source projector with HDMI and audio Bluetooth
GPX specifies native 800 × 480, dual HDMI, VGA, USB, microSD and composite AV, plus manual focus and keystone adjustment. Bluetooth sends audio to a speaker; it does not carry projected video. GPX lists LED illumination and an external power adapter, but no ANSI-labeled brightness value. Its small native image and broad wired input set define a low-detail, source-dependent use.
Battery-powered portable projector with native 720p
Brookstone's 318023P manual lists native 1280 × 720, up to 200 lumens, a 7,800 mAh battery rated for up to 1.5 hours, autofocus and vertical auto keystone. Those are model specifications, not a current used battery or ANSI brightness measurement. The manual also lists 5 GB of internal memory, but does not establish streaming-app support.
XGA meeting projector with 3000 ANSI lumens and optical zoom
ViewSonic's exact PJ588D sheet lists native XGA 1024 × 768, 3000 ANSI lumens, a 1.15× manual zoom and a 1.8–2.1:1 throw ratio. The lamp-based unit includes wired presentation inputs and a 1 W speaker. It is suited to a measured conventional installation, while the older panel and current lamp condition should be weighed against modern widescreen sources.
Exact T1 identity; core specifications need confirmation
SKYWORTH Digital's official page identifies a T1 projector, supporting the exact model identity. The retrieved page material does not expose readable technical parameters for native resolution, brightness method, throw, power, inputs or light source. Those values remain unknown here; do not infer them from the candidate title or from another product also called T1.
Full HD D-ILA home projector with motorized lens shift
JVC documents three native 1920 × 1080 D-ILA devices, motorized 2× zoom and focus, and motorized vertical and horizontal lens shift. The 1300-lumen model figure is not ANSI-labeled. Its 220 W lamp and two HDMI inputs suit a fixed home-theater installation, with 3D glasses and emitter sold as optional equipment.
Pocket gaming projector with native WVGA and RGB LED
Optoma's PT110 sheet lists native WVGA 854 × 480, 100 LED lumens, RGB LED illumination, a 2.1:1 throw ratio and a 3 W speaker. The source explicitly labels the output LED lumens, not ANSI, and lists external power. It is a small-image casual gaming option, not a substitute for a bright home-theater panel.
Native WXGA portable projector with 800 ANSI lumens
Vivitek identifies the original Qumi Q7 with native WXGA 1280 × 800, up to 800 ANSI lumens, LED illumination, 4 GB memory and a 1.30–1.43:1 throw ratio. It offers local-file playback and multiple wired inputs; wireless projection needs an optional USB Wi-Fi dongle. AC power is specified, and file playback does not establish current streaming apps.
Legacy 720p home cinema projector with optical lens shift
Panasonic's PT-AE700U file lists native 1280 × 720 3LCD panels, 1000 lumens without an ANSI label, a 130 W UHM lamp, 1.2× manual zoom and vertical/horizontal optical shift. It accepts 1080-format signals but displays them at 720p. The older HDMI home-cinema model requires lamp, input and lens checks on the specific unit.
WXGA presentation projector with a stated 3,000 ANSI lumens
BenQ specifies native WXGA 1280 × 800, 3,000 ANSI lumens, a 1.2× manual zoom and a 1.49–1.79:1 throw range. The MW523 uses a 190 W lamp and offers HDMI plus VGA and legacy video connections. Its standard-throw placement and lamp condition matter more than the historical listing title; no current offer or included accessories are verified.
Short-throw WXGA classroom projector; interactive kit is optional
BenQ specifies native WXGA 1280 × 800, 3,200 ANSI lumens, a fixed short-throw lens, a 210 W lamp and a 10 W speaker. The model supports optional PointWrite pen hardware, but a projector-only listing does not prove that the kit or pens are included. HDMI/MHL and LAN control support a wired classroom installation, not built-in streaming.
Portable WXGA presentation projector with a stated 2,600 ANSI lumens
Hitachi's CPWX8 brochure specifies a 3LCD WXGA panel, 2,600 ANSI lumens in Normal mode, a 1.2× manual zoom and a 200 W UHP lamp. It lists HDMI, VGA, component, composite and S-Video inputs. This is a conventional-throw portable data projector; inspect the lamp, air filter, lens and analog connectors on any used example.
Battery-powered pocket projector; native pixels and ANSI output unverified
Optoma's PK100 manual documents a removable rechargeable battery, two brightness modes, manual focus, an AV input and a projection chart up to 66 inches at 2.636 metres. It does not establish a native pixel count, ANSI rating or battery runtime. Treat the small image and the current battery as unit-specific, and confirm adapters and cables before buying.
Seasonal-effects projector with looping content and full-size HDMI input
AAXA's CP3 guide describes a holiday-effects projector with a loop function, 16:9 format, manual focus and a 1.4:1 throw ratio. It accepts a full-size HDMI connection and begins its distance chart at about 25 inches. Native pixels and ANSI brightness are not established, so screen size, ambient light and current unit condition need a real check.
WXGA business projector with HDMI and legacy office connections
Ricoh specifies the PJ WX5140 as a single-chip DLP WXGA projector with 3,200 lumens under its stated JIS measurement method, not ANSI. It uses a 1.1× manual zoom, a 230 W UHP lamp and a 5 W mono speaker, with HDMI, VGA, S-Video and composite inputs. Its 100-inch image needs roughly 3.0–3.3 metres of throw distance.
Short-throw Full HD home projector with HDMI/MHL
BenQ's shared HT1075/HT1085ST manual names the models separately and identifies the HT1085ST's short-throw optics. The model uses a native 1920 × 1080 DLP imager, 240 W lamp, two HDMI-class inputs including MHL and a 10 W speaker. An ANSI-labeled brightness figure and the HT1085ST's used-lamp state are not established in the saved model evidence.
Full HD smart projector with Android TV 9 and autofocus
Nebula and FCC materials identify the Cosmos D2140 as a native 1920 × 1080 DLP projector rated at 810 ANSI lumens. The official page lists Android TV 9, autofocus, a 1.2:1 throw ratio, two HDMI ports and USB-A. It uses a DC power supply rather than a built-in battery; present app support and a candidate-title Renewed suffix do not verify a current offer's software or condition.
Legacy XGA DLP projector with a stated 2,000 ANSI lumens
Toshiba's TDP-PX10U specification sheet identifies native XGA 1024 × 768 DLP, a 2,000 ANSI-lumen rating, a 1.17× manual zoom and a 180 W lamp. VGA, S-Video and composite inputs connect older computers and video equipment; the model accepts higher-format inputs but remains XGA. It uses AC power and a 2 W mono speaker.
YD10 model with documented HDMI and TF-card inputs; imaging specs unknown
FCC records identify YD10 as a projector and name Yingda as the applicant; a separate candidate listing uses the HOPFROG brand. The model manual documents a power-cord setup, manual focus, HDMI and TF-card input. It does not establish native pixels, ANSI brightness, battery operation or the HOPFROG-to-Yingda relationship, so a seller must confirm the exact unit and needed output.
Rechargeable pocket projector with a documented 640 × 360 image
Brookstone's model 842364 manual documents a native 640 × 360 image, HDMI input, a rechargeable internal battery, and a 25-lumen figure that is not identified as ANSI. It is a very small-image portable option; the manual does not establish runtime, ANSI output, or throw distance, and the condition of an older battery must be checked on the actual unit.
WXGA 3LCD presentation projector with separately stated color and white output
Epson's discontinued PowerLite 1263W (V11H654120) uses a native 1280 × 800 3LCD panel, a manual 1.0–1.2× zoom, and a 1.3–1.56:1 throw range. Epson separately lists 3,000 color lumens to IDMS 15.4 and 3,000 white lumens to ISO 21118; neither is labeled ANSI. Its 200 W UHE lamp and mixed legacy/HDMI inputs suit a measured presentation-room replacement, not a current-app projector.
Battery-powered pocket projector with 854 × 480 native pixels
Lenovo's P0510 manual specifies native 854 × 480, an unqualified 50-lumen figure, a 5,200 mAh internal battery rated up to 180 minutes, a rotating 0–90° optical module, dual-band Wi-Fi, Miracast/DLNA mirroring, manual focus, and microSD support up to 32 GB. Compatibility instructions date from the model's original period; current app, operating-system, battery, and protected-content support need separate checking.
Lamp-based WXGA presentation projector with a model-manual suffix caveat
Eiki's official download entry is titled for the LC-WB200A, although the linked manual's inside cover identifies LC-WB200. That attached manual specifies a three-panel 1280 × 800 LCD image, manual zoom and focus, a 245 W lamp, and a broad throw range. This evidence supports a provisional presentation-room comparison, but buyers should confirm the suffix and applicable specifications on the unit before using it for a fixed installation.
Native 1080p LCD home projector with Wi-Fi mirroring
DBPOWER's official manual index identifies the L23 and links its manual; the model is described as native 1080p. A readable copy of that exact manual lists HDMI, VGA, USB and AV connections, external AC power, a 1.44:1 throw ratio, and a 1.3–5.5 m setup range. The available exact-model source does not establish a reliable ANSI figure, so brightness remains unranked here; Wi-Fi mirroring is not treated as built-in streaming apps.
Entry-level 800 × 480 LCD projector with wired home-video inputs
The DBPOWER T20 manual describes a small LCD projector intended for home entertainment rather than office presentations. It lists native 800 × 480 pixels, HDMI, USB, SD, AV and VGA inputs, a 1.4:1 projection ratio, 1.5–5 m setup distance, and external power. A 1,500-lumen figure is not identified as ANSI. The older manual is hosted by a third party; confirm the model label, image and included cables on the actual unit.
Native 720p home projector with electric focus and Wi-Fi mirroring
TOPTRO's TR25 manual identifies a native 1280 × 720 image and an AC-powered LCD/LED design. TOPTRO's product page describes electric focus, dual-band Wi-Fi, Bluetooth 5.2, HDMI and USB, and 60–120 inch images at 1.3–3.5 m. It also advertises 1080p input support, which does not change the native panel. The sources do not establish ANSI output or a built-in streaming-app platform.
Battery-powered native 720p pocket projector with a small image target
Miroir's MP150A manual lists native 1280 × 720 pixels, an unqualified 200-lumen figure, a 6,000 mAh battery with up to two hours stated, and images up to 100 inches at 2–10 feet. Its 1.66:1 throw is conventional rather than ultra-short. The manual is manufacturer-authored but hosted by third-party manual sites; ANSI output and the condition of any present battery remain unknown.
Battery-powered projector hotspot with HDMI and Wi-Fi Display
ZTE's MF97W Quick Start Guide identifies the Wi-Fi Ufi device and documents charging its battery, turning the projector on and off, projecting HDMI, mirroring a phone with Wi-Fi Display, and using USB and microSD. The guide does not provide a native pixel grid, ANSI brightness, throw range, or runtime. It is a specialized portable device whose optical performance and aging battery need unit-level checks.
Compact AC-powered projector with a model-specific manual but unresolved native resolution
The N3 manual identifies an AC-powered LCD projector with HDMI and USB, 50 W input, vertical keystone, a 30–210 inch image range, variable digital zoom, and 2 W speakers. VOPLLS's site calls the model Full HD, but the reviewed sources do not establish that 1080p is native rather than supported input. ANSI output and throw distance also remain unknown, so use the manual for setup facts and verify the image on the exact unit.
Native Full HD with a 1.35:1 standard-throw lens and Android version limits
The C50 manual identifies a native 1920 × 1080 TFT-LCD projector with a 1.35:1 throw ratio, LED light source, HDMI and USB inputs, and Android 9.0. Its 500 ANSI-lumen figure is a manufacturer claim shown with 12,500-lumen marketing wording, not an independent measurement. The manual warns that Netflix, Hulu, and Prime Video apps are unsupported through the projector; use an external HDMI source for protected streaming.
Native Full HD gaming with a 16 ms mode and conventional lamp placement
Optoma specifies a 1920 × 1080 DLP image, 3,600 lumens without an ANSI label, 16 ms enhanced gaming response, a 1.47–1.62:1 throw range, manual 1.1× zoom, and a 240 W lamp. It suits a measured home room with HDMI sources; lamp hours, used-unit output, and the contents of any offer must be checked separately.
UHD output and a 1080p 240 Hz gaming mode in a standard-throw lamp design
Optoma lists UHD 3840 × 2160 output, 4,000 lumens without an ANSI label, and 1080p gaming up to 240 Hz with a stated 4.2 ms response. Its conventional 1.5–1.66:1 throw, manual 1.1× zoom, zero vertical lens shift, dual HDMI 2.0 inputs, and 240 W lamp suit a measured fixed home installation. The reviewed page does not establish the imager's native pixel count.
Battery-powered pocket DLP with a small 640 × 360 image and HDMI input
Magnasonic marks the PP60 discontinued and specifies a 640 × 360 DLP image, up to 25 ANSI lumens, a 2,100 mAh rechargeable battery rated over two hours, HDMI input, and a 1 W speaker. The maker recommends images up to 60 inches. This is a small, dark-room portable display; it accepts HD sources but does not project them at HD resolution. Battery health and accessories are unknown on any used offer.
Slim portable WXGA 3LCD with wireless presentation and method-separated output
Epson identifies the PowerLite 1776W as a portable 3LCD projector with native WXGA 1280 × 800, 3.8 lb weight, wireless 802.11 b/g/n presentation, USB memory playback, and HDMI. Its page lists 3,000 color lumens and 3,000 white lumens separately; those figures use IDMS 15.4 and ISO 21118, not an ANSI label. A 1.04–1.26:1 throw and 1.0–1.2× optical zoom suit measured conventional placement.
Native Full HD with USB local playback and external HDMI sources
The HOMPOW-authored C10 manual specifies a 4-inch LCD panel with native 1920 × 1080 resolution, an LED light source, AC 100–240 V power, two HDMI and two USB inputs, and local playback of supported files. Bluetooth is described for audio devices, not connecting a phone or computer. The manual does not establish ANSI brightness, throw ratio, or built-in streaming apps, so those remain unknown.
WXGA classroom projector with a 4,000 ANSI-lumen high-bright rating
NEC's ME401W datasheet describes a professional business projector for classrooms and meetings with native WXGA 1280 × 800 3LCD, 4,000 ANSI lumens in High Bright mode, a 1.3–2.2:1 throw, and manual 1.7× optical zoom. Two HDMI inputs, VGA, and a 20 W speaker support fixed room use. Wireless presentation needs an optional module; lamp hours and the condition of any used unit are unknown.
Native Full HD and ANSI-rated output for a wired presentation room
Sharp NEC documents the NP-V302H as a native 1920 × 1080 DLP projector with a 3000 ANSI-lumen High Bright rating, 1.5–1.8:1 throw, and manual 1.2× zoom. Two HDMI inputs, VGA, and 8 W stereo speakers suit a fixed meeting or classroom setup. It uses a 218 W lamp, so a used unit's hours and present output need their own check.
Pixel-shifted 4K with powered lens placement and lamp upkeep
Epson's Pro Cinema 6050UB uses three 1920 × 1080 LCD panels with 4K Enhancement pixel shifting. Its 2600 white lumens use ISO 21118 and 2600 color lumens use IDMS 15.4, not ANSI. A powered 2.1× zoom and horizontal/vertical lens shift support a carefully planned home installation; the 250 W lamp and 24.7 lb chassis make condition, mounting, and replacement parts important.
Portable XGA slides with a legacy analog input set
Epson identifies EX50 code V11H284220 as an XGA 1024 × 768 3LCD projector. It lists 2200 white lumens under ISO 21118 and 2200 color lumens separately, not as ANSI, with a 1.4–1.68:1 throw and 1.0–1.2× optical zoom. Its VGA/component, S-video, composite, and USB Type-B inputs suit older office equipment, but the brochure lists no HDMI and no battery.
1080p gaming at 120 Hz with a standard Android TV dongle
BenQ specifies the X1300i as a native 1920 × 1080 4LED projector with 3000 ANSI lumens and a 1.3–1.56:1 throw. Its stated input lag is 8.3 ms at 1080p/120 Hz and 16.7 ms at 1080p/60 Hz. The standard package includes a QS01 Android TV dongle; this is a fixed AC-powered home projector, not UST or battery-powered.
Fixed short-throw XGA for legacy presentation
ViewSonic documents the PJD6381 as a native XGA DLP projector with a fixed 0.68:1 short-throw lens and two VGA inputs. Its 3,000-lumen output is not labeled ANSI, and its 4:3 image and analog-heavy panel suit a maintained presentation room better than a modern streaming-first setup.
Compact 480p projector for external sources
GPX lists the PJ308W as a compact projector with native 800 × 480 resolution, two HDMI inputs, VGA, USB, microSD, and manual focus. Its versions 1993 and 2190 differ on Bluetooth audio, and the frozen candidate does not identify a revision, so Bluetooth stays unresolved.
720p home theater with optical lens shift
Optoma's HD7100 data sheet documents native 1280 × 720 DLP imaging, a 1.30–1.62:1 conventional throw, and four-way optical lens shift. Its 1,000-lumen figure is not labeled ANSI, and its DVI-D, component, composite, S-video, and VGA connections reflect an older home-theater system.
XGA presentation with stated ANSI brightness
Toshiba documents the TDP-T45U as a native XGA DLP projector rated at 2,500 ANSI lumens, with a conventional 1.725–1.995:1 throw and 1.2× manual zoom. Its VGA, composite, and S-video panel suits an older presentation system rather than an HDMI-first setup.
Battery-powered SVGA pocket projection
3M identifies the MP160 as a battery-powered LCoS pocket projector with native SVGA 800 × 600, fixed focus, VGA and AV input, and roughly two hours of stated operation. Its product sheet lists 30 lumens without an ANSI basis, and the two 3M documents give different maximum image-size ranges.
4K ultra-short-throw bundle with 120-inch screen
Hisense's 120L5FBDL sheet describes a 4K Smart Laser Cinema bundle with a 120-inch ALR screen, 0.25:1 ultra-short-throw optics, Android TV, and dual-band Wi-Fi. Its 2,700-lumen figure is not labeled ANSI, and the sheet does not establish native imager pixel dimensions.
Full HD portable projector with USB-C input
Miroir identifies the M631 as a native Full HD portable projector with a rechargeable battery, HDMI and USB-C video, motorized focus, automatic keystone, and two 3 W speakers. Its 700-lumen figure is not labeled ANSI, its battery statements differ between 1.5 and 2 hours, and AirPlay/screen mirroring is not supported.
Wide-format room presentations
A lamp-based WXGA DLP meeting-room projector with 1.5× optical zoom, two HDMI inputs, LAN controls, and a 20 W speaker. BenQ's 4,200-lumen figure is not labeled ANSI in the reviewed announcement.
Full HD home viewing with a documented ANSI rating
The Curtis-authored guide identifies RPJ167, a native 1920 × 1080 projector rated at 450 ANSI lumens, with three HDMI inputs, USB, and an external mains adapter. Throw ratio and integrated streaming remain unverified.
Native Full HD for a conventional room layout
Acer's manual identifies a native 1920 × 1080 DLP home-video projector with 1.2× manual zoom, a 1.50–1.80:1 throw ratio, and HDMI/MHL input. The reviewed specification does not establish ANSI brightness.
ANSI-rated XGA for a presentation room
ViewSonic documents native XGA DLP, 3,300 ANSI lumens, a 1.3× zoom, and a 1.51–1.97:1 conventional throw. Regional pages differ in HDMI/MHL port enumeration, and the historical row's renewed suffix does not establish unit condition.
Try a product name, brand, or category.