Our take
The Ricoh IPSiO PJ WX5140 is a conventional-throw business projector with native WXGA resolution and a practical set of HDMI, VGA and legacy video connections. Ricoh reports 3,200 lumens using the JIS X6911:2003 method; the source does not label that figure ANSI, so it should not be ranked against ANSI-only requirements. It is a sensible comparison for a wired meeting-room system if the lamp and throw distance are acceptable.
A business or meeting room that needs WXGA slides, legacy video connections and a measured standard-throw position..
It is not a verified ANSI-brightness match, a battery projector, a UST installation or an integrated streaming system.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- Ricoh specifies native 1280 × 800 WXGA on a single-chip DLP system.
- The connector panel lists HDMI, two VGA inputs, S-Video and composite video.
- A manual 1.1× zoom and distance chart support practical room measurement.
What to weigh up
- Ricoh's 3,200-lumen value is measured under a stated JIS method rather than labeled ANSI.
- A 230 W standard-mode high-pressure mercury lamp is a consumable in an older projector.
- Ethernet and RS-232 are described for projector control, not as a built-in streaming platform.
The key details
| Model covered | PJ WX5140 |
|---|---|
| Image format | Native WXGA 1280 × 800 DLP, 16:10 |
| Rated light output | 3,200 lumens under Ricoh's JIS method; not ANSI-labeled |
| Placement | 1.1× manual zoom, HDMI, two VGA inputs and UHP lamp |
Performance figures are manufacturer claims. Source checked October 11, 2026. Regional models and included accessories can differ.
What the features mean for you
What room role does the WX5140 serve?
Ricoh lists the IPSiO PJ WX5140 as a business projector and specifies a WXGA 16:10 image. Native 1280 × 800 resolution gives meeting slides a widescreen layout, while remaining below Full HD. Its 30-to-300-inch image range is broad on paper, but large image size still depends on room depth, focus and lamp condition. For a fixed or shared meeting room, the model's combination of WXGA and wired inputs is more relevant than any assumption that it will act like a current app-equipped home projector.
Why does Ricoh's brightness method matter?
Ricoh lists 3,200 lumens for the WX5140 and states that its figures follow the JIS X6911:2003 data-projector specification method. That is not an ANSI label, so the matcher keeps ANSI brightness unknown rather than converting the number. Buyers who must meet an ANSI minimum should compare an ANSI-rated source on its own basis. For a used WX5140, the model-level JIS value also cannot predict the present lamp's brightness; request a demonstration and ask about lamp hours and operating mode.
How far from the screen must it sit?
Ricoh gives a 1.0-to-10.0-metre projection range and a screen-distance chart, with a 100-inch diagonal image at about 3.0 to 3.3 metres depending on zoom. The lens has 1.1× manual zoom and manual focus. Measure from the lens to the screen, not just from the projector case, and confirm the installation offset. This is conventional throw, not ultra-short-throw. The chart helps with planning, while an actual test confirms that a particular lens focuses evenly and reaches the intended image size.
Which sources and audio connections are listed?
Ricoh documents two mini D-Sub VGA computer inputs, HDMI, composite video and S-Video, together with three audio inputs and a 5 W mono speaker. It also lists Ethernet for projector control, RS-232 control and a USB mini-B service port. Those control connections are useful for managing installed equipment but do not establish streaming apps. Check signal compatibility and any adapter needed for newer laptops. For a larger room, assess whether the listed mono speaker is enough or whether external audio should be part of the setup.
What do lamp and power details mean for ownership?
Ricoh lists a 230 W high-pressure mercury lamp in Standard mode and 190 W in Eco mode, with AC 100 V power. The lamp is consumable; its rated model specification does not reveal how much life remains in a used example. Ask for the timer, test both modes, inspect cooling and focus, and verify the fan does not show a fault. The source page covers a discontinued model and historic specifications, not parts availability or current offer condition. Confirm local power and any replacement-lamp plan before a fixed installation.
Who should compare the PJ WX5140?
The WX5140 fits a meeting room that still needs analog VGA or legacy video alongside HDMI, wants native WXGA and has enough depth for a conventional lens. It is a weaker choice if a buyer requires a verified ANSI figure, native Full HD or built-in video apps. Ricoh's source page is unusually clear about its old measurement method, which helps prevent a false brightness comparison. Use an exact-model search, inspect the connector panel, and check lamp hours, remote, power cable and operation before choosing a unit.
What else to compare
Compare Hitachi CP-WX8 for a portable WXGA model with a stated ANSI rating, or BenQ MW523 when standard-throw ANSI output is a priority.
Before you buy
Is Ricoh's 3,200-lumen value ANSI?
No. Ricoh says the figure follows its stated JIS method and does not label it ANSI.
What is the WX5140's native resolution?
Ricoh specifies a native WXGA image at 1280 × 800 pixels.
Does its Ethernet port provide streaming apps?
No. Ricoh identifies the RJ45 connection for projector control, not streaming services.
How far away is a 100-inch image?
Ricoh's chart gives about 3.0 to 3.3 metres for 100 inches, depending on the manual zoom setting.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Ricoh official discontinued-model specifications for IPSiO PJ WX5140 ↗ — checked October 11, 2026.
- Ricoh IPSiO PJ WX5140 official specifications ↗ — checked October 11, 2026.
- Ricoh projector manuals index for the WX5140 ↗ — checked October 11, 2026.
The decision
Choose the PJ WX5140 for a wired office setup where WXGA detail, the JIS-rated output basis and lamp condition are understood.
Is it the right fit?
Check the exact model and today’s offers on Amazon.