Our take
Waring FP40C combines a 4-quart batch bowl with a continuous-feed chute. Its manual states a 2.5-quart wet limit, a 1.5-horsepower motor and standard slicing and shredding discs; the S-blade handles bowl-based chopping, mixing and kneading. The family documentation covers more than one electrical variant, and the frozen Amazon ASIN does not identify which one is being offered. This model can suit a commercial preparation line, but its exact voltage and delivered starter kit must be checked before purchase.
A commercial kitchen that needs batch-bowl and continuous-feed work, can confirm the electrical variant, and can accommodate a sizable base..
Avoid it if you need a household footprint, a wet fill above 2.5 quarts, a confirmed 120-volt seller unit, or a dicing tool in the standard kit.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- The manual documents both a 4-quart batch bowl and a separate continuous-feed chute.
- A starter slice/shred set and S-blade give the model distinct bowl and disc tasks.
- The 1.5-horsepower rating is stated in the model instruction manual.
What to weigh up
- The 2.5-quart wet limit is lower than the 4-quart dry bowl volume.
- Waring's documentation covers 120- and 240-volt units, but this ASIN's version is not identified.
- The exact B0049GOVXS package and condition are not confirmed by the maker documents.
Specifications and exact model details
The key details
| Model covered | FP40C |
|---|---|
| Main bowl capacity | 4-quart dry bowl (16 nominal U.S. cups); the manual separately gives a 2.5-quart wet capacity |
| Small-batch bowl | One batch bowl; the continuous-feed chute is a second processing setup, not a small bowl |
| Slicing and shredding | Starter kit includes a slicing disc and a shredding disc |
| Special attachment | The manual lists optional processing discs; no dicing grid is part of the standard starter set |
| Dough blade | S-blade is documented for kneading; no separate dedicated dough blade is listed |
| Integrated cooking | No integrated heating or cooking function is documented |
Performance figures are manufacturer claims. Source checked October 14, 2026. Regional models and included accessories can differ.
Full review: how the features affect your choice
What the features mean for you
Dry bowl volume and wet capacity are different limits
Waring describes a 4-quart dry bowl and a separate 2.5-quart wet capacity for the FP40/FP40C line. Four U.S. quarts convert to 16 nominal cups, but that conversion is not a suggested wet fill or a tested recipe size. The manual's lower liquid limit matters for sauces, purées and other mixtures that move differently from dry ingredients. A shopper comparing it with the 6-quart FP2200 should compare both figures, not only the largest number printed on a page. Follow the operating instructions for any real batch. [bowlCapacityCups]
FP40C adds a continuous-feed setup to the bowl
The manual distinguishes FP40C from batch-only FP40: the C model includes a continuous-feed chute in addition to the same batch-bowl system. This gives an operator two layouts for processing rather than a single bowl with one tool. The manual describes the chute for repeated slicing, shredding, grating and julienne work, while the bowl supports the S-blade and disc work. Assembly and disassembly add steps, so this format is most relevant when the second workflow will be used. It should not be confused with WFP14FC's flat-cover batch processor or with a handheld feed-through tool. [handheldFeedThrough]
Starter discs are distinct from optional accessories
The Waring manual says the FP40C ships with the same attachments as FP40 plus the continuous-feed chute, and identifies a starter kit with a 1/8-inch slicing disc and a 3/16-inch shredding disc. Its specification sheet lists many additional discs as optional. This distinction supports a slice/shred profile without suggesting that every julienne, grating or dicing disc comes in the box. The S-blade also supports kneading, but the documented starter set does not identify a separate dough blade. If a seller package is used or renewed, confirm the starter discs and feed parts. [sliceShred, doughBlade, dicingKit]
Voltage must be checked on the delivered unit
The shared FP40/FP40C manual discusses both 120-volt and 240-volt units. The historical row does not establish which one corresponds to B0049GOVXS, so this article leaves North American voltage unknown instead of copying a general catalog line onto the candidate. Before buying or connecting a used unit, read the nameplate and verify its plug, supply and frequency against the intended outlet. A model search can surface more than one version, and an Amazon URL alone does not prove electrical compatibility. [northAmericanVoltage]
The commercial format brings a parts and space tradeoff
The spec sheet gives a large commercial footprint, and the manual describes interlocks, cleaning steps and separate chute parts. This machine is a different choice from the 10-cup Hamilton Beach 70760: the Hamilton's single home bowl uses a reversible disc, while FP40C adds a commercial chute and a larger motor system. No claim here measures speed, durability or daily throughput. A kitchen should plan storage and safe washing for the chute, bowl, covers, pushers and discs, then compare the exact seller kit with the manual's model-specific parts. [bowlCapacityCups, handheldFeedThrough]
Compare for your needs
For a 6-quart commercial bowl with a documented 120-volt page configuration compare Waring FP2200; for simpler home slice/shred work compare Hamilton Beach 70760.
Find the food processor or chopper that fits you.
Tell us what matters. We’ll help you weigh the options.
Before you buy
What comes with the FP40C starter set?
The manual describes the FP40 attachments plus a continuous-feed chute, including an S-blade, 1/8-inch slicing disc and 3/16-inch shredding disc.
What is the FP40C wet capacity?
The Waring manual lists 2.5 quarts wet and 4 quarts dry; the wet limit should not be replaced by the larger dry-bowl figure.
Is B0049GOVXS confirmed as a 120-volt unit?
No. The family manual covers both 120- and 240-volt units, and the saved Amazon ASIN is not mapped to a specific electrical version.
Does FP40C include a dicing kit?
The standard starter parts list gives slice and shred discs; Waring lists additional discs as optional, and a dicing kit is not assigned to the standard set.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources and review basis
Sources & review basis
We use the linked product documentation for the features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Waring FP40/FP40C instruction manual and specification sheet ↗ — checked October 14, 2026.
- Waring FP40/FP40C instruction manual: model distinction, capacities, 1.5 HP motor, starter discs and continuous-feed setup ↗ — checked October 14, 2026.
- Waring FP40/FP40C specification sheet: combination model and electrical variant table ↗ — checked October 14, 2026.
The decision
Consider FP40C when both batch-bowl and continuous-feed workflows matter, then verify its voltage and exact accessory set with the seller.
Is it the right fit?
Check the exact model and today’s offers on Amazon.