Our take
The Waring FP2200 combines a 6-quart dry cutter bowl with a separate continuous-feed hopper. The maker page specifies a 3/4-horsepower motor and a 120-volt, NEMA 5-15P configuration; the manual gives a 2.5-quart wet-capacity limit. It also identifies slicing, shredding and dicing plates for the model. These are commercial machine specifications, not independent performance tests, and they do not confirm the exact accessories in historical Amazon ASIN B0BSGSHNF6.
A commercial kitchen looking for batch-bowl and continuous-feed preparation with a documented 120-volt configuration and room for a large machine..
Skip it if you need a small household unit, a light countertop footprint, an unverified seller kit, or a wet working capacity above the manual's 2.5-quart limit.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- The manual separates a 6-quart dry bowl from its 2.5-quart wet limit.
- The model supports batch-bowl and continuous-feed configurations with documented cutting plates.
- Waring specifies 120 volts and a NEMA 5-15P plug for this product page configuration.
What to weigh up
- The 2.5-quart wet limit is far below the dry bowl's nominal volume.
- Its commercial-size base and two processing setups need more room than a compact home chopper.
- The exact B0BSGSHNF6 seller kit and condition are not crosswalked to Waring's current model page.
Specifications and exact model details
The key details
| Model covered | FP2200 |
|---|---|
| Main bowl capacity | 6-quart dry bowl (24 nominal U.S. cups); 2.5-quart wet capacity is separately stated |
| Small-batch bowl | One large cutter bowl plus a separate continuous-feed hopper; no mini work bowl is listed |
| Slicing and shredding | The model manual identifies slicing and shredding plates |
| Special attachment | Manual identifies 1/2-inch and 3/4-inch dicing plates for the continuous-feed setup |
| Dough blade | The S-blade is described for kneading; no separate dough blade is listed |
| Integrated cooking | No integrated heating or cooking function is documented |
Performance figures are manufacturer claims. Source checked October 14, 2026. Regional models and included accessories can differ.
Full review: how the features affect your choice
What the features mean for you
Read the two capacity figures separately
Waring lists a 6-quart dry capacity and a 2.5-quart wet capacity for FP2200. The dry figure equals 24 nominal U.S. cups; the separate wet figure is the relevant constraint for liquid-heavy mixtures. Those numbers describe different use cases and should not be collapsed into a single maximum fill claim. The manual also gives operating and food-preparation instructions, so a buyer should use those for a specific recipe rather than assuming the whole vessel is usable space. This bowl makes sense for planned commercial batches, while the wet limit can rule it out for large sauces or purées. [bowlCapacityCups]
Choose between the bowl and feed chute
The FP2200 has a cutter bowl for chopping and mixing and a separate continuous-feed hopper for repeated cutting jobs. Waring's model page describes both setups, and the manual explains how the same pusher and feed parts serve that system. This is a meaningful alternative to WFP14FC, which the catalog describes as a batch-only 3.5-quart processor. The feed-through setup can move sliced or shredded food away from the bowl, while the bowl remains available for its own tasks. It also means more components to assemble, wash, store and verify in a seller package. [handheldFeedThrough]
Model tools include slicing, shredding and dicing
The FP2200 instruction booklet identifies two dicing plates, slicing plates and a shredding plate as equipment for this model. It explains that a dicing grid works with a slicing plate in the continuous-feed chute, which gives the dicing label a concrete tool requirement. This is stronger evidence than a generic marketplace title alone. Still, the frozen ASIN is not crosswalked to Waring's exact standard kit, so the search destination should not be read as proof that every seller box contains every plate described in the manual. Confirm the plates, pusher and chute with the exact offer. [sliceShred, dicingKit]
Commercial controls and voltage need a suitable work area
Waring specifies touchpad On, Off and Pulse controls, a 3/4-horsepower motor and a 120-volt plug configuration. The product page lists a 16-inch width and 26.5-inch height, which signals that counter placement and overhead clearance deserve planning. This is not an assertion about speed, noise or durability in a particular kitchen. The maker's electrical specification applies to the model configuration cited here; inspect a delivered unit's nameplate and manual, especially if shopping used or through a marketplace seller. [northAmericanVoltage]
Treat the historical listing as a search clue
The saved candidate row names Waring FP2200 but its Amazon page could not establish the exact package or condition. The article therefore links to a tagged exact-model search rather than a direct ASIN. Waring's page and manual support the model facts above, but a seller may offer a different condition, replacement parts or configuration. Compare the model label, bowl, feed hopper, pusher and plates against the maker documentation before purchase. If the workflow only needs batch chopping, the simpler WFP14FC may be enough; if a home-scale unit is the priority, the Hamilton Beach 70760 has a documented 10-cup bowl. [bowlCapacityCups, handheldFeedThrough]
Compare for your needs
For a 4-quart bowl with a continuous-feed chute compare Waring FP40C; for a simpler 3.5-quart batch bowl compare WFP14FC, checking voltage and seller parts for each listing.
Find the food processor or chopper that fits you.
Tell us what matters. We’ll help you weigh the options.
Before you buy
What is the FP2200 wet capacity?
Waring's instruction booklet states a 2.5-quart wet capacity separately from its 6-quart dry bowl capacity.
Does FP2200 have dicing equipment?
The manual says the FP2200 is equipped with two dicing plates and describes using a dicing plate with a slicing plate in its continuous-feed setup.
Is the 120-volt rating confirmed for a model configuration?
Yes. Waring's product page lists 120 volts and a NEMA 5-15P plug; verify the exact seller unit and its nameplate before use.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources and review basis
Sources & review basis
We use the linked product documentation for the features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Waring FP2200 commercial product page and instruction booklet ↗ — checked October 14, 2026.
- Waring FP2200 product page: model, capacities, 3/4 HP motor, continuous feed and 120 V / NEMA 5-15P specs ↗ — checked October 14, 2026.
- Waring FP2200 instruction booklet: 6-quart dry and 2.5-quart wet capacity, dicing, slicing, shredding and controls ↗ — checked October 14, 2026.
The decision
Choose FP2200 when a 6-quart dry bowl, separate feed-through workflow and the documented tool set fit the kitchen, then verify the seller package.
Is it the right fit?
Check the exact model and today’s offers on Amazon.