Our take
Choose the Anker 535 A8353 for a supported iMac setup that needs fast peripheral data ports and both common camera-card formats. Its fixed host scope and lack of monitor, Ethernet, or laptop-charging features make it a focused desktop hub rather than a general dock.
A USB-C or Thunderbolt 3 iMac owner who wants nearby fast USB connections and SD/microSD card access, after checking the exact iMac model..
Skip it for Thunderbolt 2 iMacs, Apple Studio Display, non-iMac hosts without Anker confirmation, or a setup that needs HDMI, Ethernet, or laptop PD pass-through.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- The exact A8353 model, part number A8353041, and Amazon ASIN are identified.
- Two USB-A and one USB-C data port are listed at up to 10Gbps.
- Anker lists SD and microSD UHS-II card readers and publishes a specific host-compatibility boundary.
What to weigh up
- Anker says Thunderbolt 2 iMacs and Apple Studio Display are incompatible.
- The hub has no HDMI, Ethernet, or laptop PD pass-through.
- USB-C peripheral charging is listed at 7.5W, not laptop charging.
Specifications and exact model details
The key details
| Model covered | A8353 |
|---|---|
| Host connector | USB-C host; specifically designed for listed USB-C/Thunderbolt 3 iMacs |
| USB 3.x data ports | 2 USB-A 10Gbps data ports plus 1 USB-C 10Gbps data port |
| Installation | Integrated iMac-oriented hub; no separate mount listed |
| Hub power | No external hub supply listed; connected through iMac host |
| Host charging | USB-C peripheral charging up to 7.5W; no laptop PD pass-through |
Performance figures are manufacturer claims. Source checked October 5, 2026. Regional models and included accessories can differ.
Full review: how the features affect your choice
What the features mean for you
A small expansion hub designed around an iMac
The A8353 adds three high-speed data ports and two card readers to its intended iMac setup. Anker lists two USB-A ports and one USB-C port at up to 10Gbps, plus SD and microSD UHS-II readers. That arrangement suits a desk needing peripherals and camera-card access while leaving the monitor and network connection elsewhere in the setup. It is not a broad travel dock: HDMI and Ethernet are not part of the documented layout.
Check host compatibility before selecting it
Anker describes the hub for USB-C or Thunderbolt 3 iMacs and specifically excludes Thunderbolt 2 iMacs and Apple Studio Display. A USB-C plug on a different laptop, monitor, or tablet does not establish compatibility. Check the computer model against Anker's current compatibility information, particularly if considering it for a non-iMac host. The inspected FAQ also says drivers are not required.
Understand the USB-C port's limited charging role
The product's USB-C port is a data connection and Anker lists device charging at 7.5W. The support FAQ gives 5V/1.5A for that port and 5V/0.9A for each USB-A output. These are peripheral power limits, not laptop power delivery. The model does not provide a documented PD input to charge the host, so it will not replace the computer's charger or a laptop docking station.
Use the listed 10Gbps and UHS-II claims as interface specifications
Anker specifies a maximum 10Gbps data rate and UHS-II card-reader support. Those labels identify the supported interface class; they are not results from an independent file-transfer test. Actual transfers also depend on the host, cable, storage device, and card. Confirm that the host and media can make use of those standards, and keep expectations modest when several connections are active because the inspected sources do not give a simultaneous-throughput result.
Confirm the exact iMac fit and Amazon variant
Amazon's item page identifies Anker 535, model A8353, part A8353041, and ASIN B09XGYWJ3F, while Anker's support material describes the iMac-focused port map. Check those identifiers and the compatible iMac generation before ordering. The compatibility wording in the historical title is not used to broaden Anker's stated scope. This review relies on published product information and makes no claim about hands-on performance, current price, stock, sales, or buyer-review trends.
Compare for your needs
Find the USB hub that fits you.
Tell us what matters. We’ll help you weigh the options.
Before you buy
Does it output video?
No. Anker's complete port list has no video output.
Can it charge the iMac?
No laptop PD input is documented; its USB-C port provides limited peripheral charging.
Is it compatible with Thunderbolt 2 iMacs or Apple Studio Display?
Anker says those models are incompatible.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources and review basis
Sources & review basis
We use the linked product documentation for the features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Anker official 535 for iMac product support page ↗ — checked October 5, 2026.
- Exact Amazon page identifies Anker 535, A8353, part A8353041, and ASIN B09XGYWJ3F ↗Paid link · We may earn a commission. — checked October 5, 2026.
- Anker support product page lists the model and its three data ports and card readers ↗ — checked October 5, 2026.
- Anker FAQ states compatible iMac scope, Thunderbolt 2/Studio Display exclusions, port power, and data limit ↗ — checked October 5, 2026.
- Amazon US model listing checked October 5, 2026; current condition, price, and availability are confirmed by the seller.
Is it the right fit?
Check the exact model and today’s offers on Amazon.