Our take
The Urbanic 080 pairs a 60 mm flat-burr set with a dial showing 100 reference levels, with adjustment possible between the marks. SkyKorea lists a 250 g hopper and 250 W motor, then gives an important operating caution: avoid grinding more than 100 g or one minute continuously. The manual lists both 110 V and 220 V versions, so the historical row does not identify which supply the offered unit uses.
For a buyer considering a confirmed Urbanic 080 who can stay within the maker's run advice and verify supply..
Not for a run requirement beyond the maker's 100 g or one-minute caution, or for a voltage, footprint or weight threshold that the offered unit has not confirmed.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- A maker manual specifies 60 mm flat burrs and 100 dial reference levels with adjustment between marks.
- The source lists a 250 g bean hopper and 250 W motor.
- The overheating and reset advice gives buyers a concrete operating limit to consider.
What to weigh up
- The historical ASIN is not mapped to the maker's black 080 variant or a current offer.
- The actual 110 V or 220 V version must be checked on the machine plate.
- The manual's dimensions and weight notation are not clear enough for strict fit screening.
The key details
| Model covered | 080 black titanium family; historical ASIN B0978212WN is not crosswalked to the maker variant |
|---|---|
| Grind and dose controls | 60 mm flat burrs; 100 dial reference levels with adjustment between marks |
| Capacity and use | 250 g hopper; 250 W; manual lists 110 V or 220 V at 50–60 Hz; check the unit plate |
| Fit and limitations | Maker warns against more than 100 g or one minute continuously; exact row variant and offer unverified |
Performance figures are manufacturer claims. Source checked October 1, 2026. Regional models and included accessories can differ.
What the features mean for you
Do not merge the 080 with Urbanic 070s
SkyKorea lists the black titanium 080 as its own model and its manufacturer notice distinguishes the 080 from the 070s and 060 families. That matters because the historical title is not a verified current product page. Treat this page as a model-level profile, and check the badge, color and rating plate on an offered unit before applying its details. The saved sources do not establish that ASIN B0978212WN contains the same exact variant.
A large flat-burr set and a marked dial
The 080 manual specifies 60 mm flat burrs and a dial with 100 reference levels, while allowing adjustment between gauge marks. The positions and espresso/drip markers describe controls, not proof of particle distribution or cup quality. The manual describes the burr material as a titanium and stainless-steel construction, but the tag profile keeps a single material value unset because the source description is mixed. Buyers who care about dial feel should inspect the offered grinder rather than infer results from the number of marks.
The 250 g hopper is not a continuous-batch target
SkyKorea lists a 250 g bean hopper, but separately cautions against grinding more than 100 g or one minute continuously to avoid overheating. Those numbers answer different questions: hopper size describes storage, while the run warning constrains a single session. After an overheat stop the manual says to reset and wait about five minutes. A separate 30-second tip addresses static reduction; it is not a measured duty rating or a daily-volume result.
Confirm the electrical version and the actual footprint
The model manual lists 110 V or 220 V and 50–60 Hz, but it does not tell us which historical row variant is represented by the ASIN. Verify the unit's plate and plug before relying on electrical compatibility. The manual's 4.9/4.95 kg weight notation and dimension order are not unambiguous about net versus gross weight or orientation, so they should not be used for a strict installation threshold. No timer or built-in weight dose is documented.
A considered fit for short home or cafe runs
The model may interest a buyer who wants a broad adjustment dial and can confirm the 080 version, supply and space before purchasing. The maker's espresso and drip labels are starting points rather than tested performance claims. It is a poor match for a required uninterrupted batch over 100 g or one minute, and the available sources do not quantify daily throughput, retention, noise or service life. This review is based on manufacturer documentation, not hands-on testing or a verified live seller offer.
What else to compare
Before you buy
What burr size and geometry does the manual give?
SkyKorea describes 60 mm flat burrs for the Urbanic 080 family.
How many dial references are shown?
The manual describes 100 references and says adjustment between marks is possible.
How much can the hopper hold?
SkyKorea lists a 250 g bean hopper; this is not a continuous-batch recommendation.
How long can it run continuously?
The manual advises against more than 100 g or one minute in a continuous run to prevent overheating.
Which voltage does the row 132 unit use?
The manual lists 110 V and 220 V options; check the exact unit plate.
Is ASIN B0978212WN a current offer?
No exact current Amazon offer or maker-variant crosswalk was verified; use the model search.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- SkyKorea Urbanic 080 use manual image set ↗ — checked October 1, 2026.
- SkyKorea Urbanic 080 Black Titanium product page ↗ — checked October 1, 2026.
- SkyKorea manufacturer notice distinguishing 060, 070s and 080 models ↗ — checked October 1, 2026.
- Historical row 132 ASIN record; maker variant mapping unresolved ↗Paid link · We may earn a commission. — checked October 1, 2026.
The decision
The Urbanic 080 pairs a 60 mm flat-burr set with a dial showing 100 reference levels, with adjustment possible between the marks. SkyKorea lists a 250 g hopper and 250 W motor, then gives an important operating caution: avoid grinding more than 100 g or one minute continuously. The manual lists both 110 V and 220 V versions, so the historical row does not identify which supply the offered unit uses.
Is it the right fit?
Check the exact model and today’s offers on Amazon.