Our take
CDN DTTC-W is a well-documented wired thermometer/timer/clock for a cook who wants a local display and alarm. CDN lists a 14°F to 392°F range, 5.5-inch probe, three-foot cable rated to 400°F, countdown and count-up timer, magnet and stand, and one AAA battery. That gives shoppers more concrete handling details than many sparse products. The cable's 400°F limit is important, however, and the unit has no stated water-protection rating. The historical ASIN is supported by saved manual/catalog records, which should still be checked against the current seller item.
A buyer who wants a wired leave-in probe, a local timer and alarm, a visible stand or magnet, and a documented cable heat ceiling..
Choose another model if you need a cable with a higher documented heat rating, multiple probes, remote/app monitoring, or a published accuracy tolerance. The cable is rated up to 400°F and must be kept within that limit; do not treat the thermometer's 392°F measuring range as permission to expose the cable or display to that temperature. The saved sources do not state an ingress rating, so keep the display and connections dry and follow the manual.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- CDN's manufacturer page identifies the DTTC-W model and publishes a 14°F to 392°F range.
- The maker specifies a 5.5-inch probe and three-foot cable with a 400°F heat limit.
- A timer, alarm, clock, magnet/stand mounting, adjustable clip, and included AAA battery are documented.
What to weigh up
- The cable's stated heat limit is 400°F, so it needs careful placement near hot grills and ovens.
- The product page does not publish an accuracy tolerance or water-resistance rating.
- The exact candidate ASIN crosswalk is from saved manual/catalog records and should be verified on the current listing.
Specifications and exact model details
The key details
| Model covered | DTTC-W |
|---|---|
| Readout | Digital probe thermometer with displayed actual/set temperature, timer, or clock |
| Documented temperature range | 14°F to 392°F; stated cable heat limit is 400°F |
| Probe and display | 5.5-inch probe with a three-foot sensor cable |
| Units and controls | Temperature alarm, count-up/countdown timer, clock, magnet/stand, and adjustable clip |
| Handling and protection | Wired probe design; no splash or immersion rating is stated |
| Power and support | One AAA alkaline battery included; saved exact-ASIN manual record maps B0BS4QMCLF to DTTC-W |
Performance figures are manufacturer claims. Source checked October 16, 2026. Regional models and included accessories can differ.
Full review: how the features affect your choice
What the features mean for you
A wired probe feeds a local display
DTTC-W is a single-probe wired device: the probe connects to a display that can show actual and set temperatures, a timer, or a clock. This makes the setup straightforward for oven or grill monitoring without an app or radio receiver. The product page does not describe remote connectivity, and the finder profile leaves it out. Check where the display will sit and route the cable so it stays away from flame and sharp edges.
Probe and cable dimensions help with placement
CDN gives a 5.5-inch probe and a three-foot sensor cable. Those numbers are useful when comparing insertion depth and distance from the cooking chamber, though they do not replace the manual's required insertion position. The cable is rated heat resistant to 400°F. Keep it from touching a flame or an area hotter than its stated limit, and avoid pulling or pinching it in an oven door. The cable limit is a practical constraint, not a measure of internal-food range.
Published range and controls are clearly stated
The manufacturer lists a 14°F to 392°F measurement range, a target alarm, and a timer that counts up and down. It also includes an international clock, stop/restart, last-count recall, and a temperature guide on the case. The page does not publish an accuracy tolerance, so do not infer precision from the breadth of the range. For safe cooking, use the applicable USDA FSIS target and check the food in the right location with the supplied instructions.
The mounting options support a nearby workspace
CDN lists two-way mounting with a magnet or stand and an adjustable stainless clip. These options make it possible to place the display on a nearby metal surface or set it on a counter, but the manufacturer does not claim that it is weatherproof or waterproof. If you grill outside, protect the display and connections from rain and splashes. The package lists one AAA alkaline battery; check that the seller includes it and review the manual for replacement guidance.
Verify the candidate listing and respect the cable limit
The saved exact-ASIN manual record and CDN catalog associate B0BS4QMCLF with DTTC-W. This draft uses a tagged model search, while the saved crosswalk gives a useful way to check the seller page. Compare the current listing with the white DTTC-W model and confirm the timer/probe package. The three-foot cable's 400°F rating is its own limit and should not be confused with the measurement range. If your oven or grill setup can exceed that cable rating, choose a higher-rated probe system.
Compare for your needs
For higher-heat cooking, compare a probe system with a cable rating above your cooking environment and a published accuracy tolerance. For multi-food monitoring, choose a documented multi-probe model.
Find the meat thermometer that fits you.
Tell us what matters. We’ll help you weigh the options.
Before you buy
How long is the DTTC-W probe and cable?
CDN lists a 5.5-inch probe and a three-foot cable rated to 400°F.
Does DTTC-W monitor food remotely by phone?
The saved manufacturer page describes a wired probe and local display, with no phone or radio connection listed.
Is the historical ASIN linked to DTTC-W?
Saved manual and catalog records associate B0BS4QMCLF with DTTC-W. Check the current seller page for the exact model before buying.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources and review basis
Sources & review basis
We use the linked product documentation for the features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- CDN DTTC-W manufacturer product page ↗ — checked October 16, 2026.
- Saved exact-ASIN DTTC-W manual record ↗ — checked October 15, 2026.
- CDN catalog record listing DTTC-W and candidate ASIN ↗ — checked October 15, 2026.
- USDA FSIS Safe Minimum Internal Temperature Chart ↗ — checked October 16, 2026.
The decision
DTTC-W combines a useful local timer/display workflow with unusually clear probe, cable, and cable-temperature details. Its cable limit, missing accuracy and protection specifications, and listing crosswalk deserve attention. Confirm the exact model and keep the cable below its stated heat ceiling.
Is it the right fit?
Check the exact model and today’s offers on Amazon.