Our take
The Optoma HD3300 is a 2011-era DLP home-theater projector with native Full HD 1920 × 1080 and a stated 2,000 ANSI-lumen rating. Optoma's datasheet gives a 1.5–1.8:1 throw, 1.2× manual zoom, and compatibility with HDMI 1.4a 3D formats. Those specifications describe the model; they do not confirm the condition of an older lamp or current compatibility of a particular media device. Its conventional lens needs measured room depth and an external source.
A darkened home-theater room with enough depth for a conventional 1.5–1.8:1 lens and a compatible 3D or Full HD source.
It is not a UST console projector, a battery-powered portable model, a smart streaming platform, or a native 4K display.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- Optoma specifies native 1920 × 1080 Full HD DLP imaging.
- The datasheet labels the 2,000-lumen rating ANSI, supporting a clearer model-level brightness comparison.
- Two HDMI 1.4a inputs, 1.2× manual zoom, and 3D support suit a traditional home-theater source setup.
What to weigh up
- The 1.5–1.8:1 throw requires more room than an ultra-short-throw model.
- The 230 W lamp and 3.5 kg chassis require powered placement and maintenance checks.
- 3D compatibility depends on the connected source, glasses, and accessories; a historic model specification does not confirm a used package.
The key details
| Model covered | HD3300 |
|---|---|
| Image format | Native Full HD 1920 × 1080, 16:9 DLP |
| Rated light output | 2,000 ANSI lumens; 3D-capable HDMI 1.4a inputs |
| Placement | 1.5–1.8:1 throw and 1.2× manual zoom/focus |
Performance figures are manufacturer claims. Source checked October 10, 2026. Regional models and included accessories can differ.
What the features mean for you
What does the native Full HD panel deliver?
Optoma identifies a native 1920 × 1080 DLP imaging device in a 16:9 frame. That suits widescreen films and detailed video more naturally than an older 4:3 presentation projector. It is Full HD rather than 4K, and the input accepting a higher signal would not change its native panel. A home-theater buyer should compare the source format, screen size, and seating distance instead of relying on a general high-resolution label. Native pixels help preserve detail, but focus, lens placement, screen quality, and lamp condition still affect the image from a specific projector.
How should I use the 2,000 ANSI rating?
Optoma's exact-model datasheet labels brightness at 2,000 ANSI lumens. That provides a defined model-level basis for comparison with other explicitly ANSI-rated projectors, rather than an unqualified lumen number. The rating cannot guarantee how bright an older HD3300 appears today. Standard or Bright mode, lamp age, screen size, image settings, and room lighting all matter. If a particular used unit is under consideration, ask for its lamp-hour menu and a current projection on the intended screen. The number is useful context, not a substitute for checking the unit or the room.
Will the lens fit a home-theater room?
The datasheet gives a 1.5–1.8:1 throw ratio, a 1.2× manual zoom, and a standard lens with manual focus. Measure from the front of the lens to the screen and use the desired image width when calculating placement. Zoom allows some adjustment after the mount position is selected, but the HD3300 cannot sit beside the wall like a UST projector. Its vertical keystone range is limited and is not lens shift. Square the projector to the screen where possible, then confirm image height, ventilation, and access to lamp and cable connections before installation.
What does 3D support require?
Optoma lists compatibility with HDMI 1.4a 3D formats, including side-by-side and top-and-bottom formats. That describes source signal support, not a complete 3D package for a present buyer. A compatible player or console, correct format settings, and suitable active-shutter glasses are still needed; the historical accessories list does not prove that any specific seller includes them. Verify the connected receiver and source path as well as the projector's HDMI ports. If 3D is only an occasional use, weigh those extra pieces against the more basic value of its Full HD panel and measured throw.
How much maintenance does the lamp add?
Optoma specifies a 230 W lamp and mode-dependent rated life. A lamp's original rating cannot reveal how many hours remain in an older projector. Ask to see the counter, inspect startup, focus, color uniformity, fan operation, vents, and the remote, then test the required HDMI source. The chassis weighs about 3.5 kg and draws AC power, so it fits a permanent shelf or ceiling mount better than a travel bag. Replacement-lamp access and availability may matter over time. No condition or included accessory is inferred from the candidate's historical Amazon record.
Who should compare this with a UST model?
The HD3300 is a conventional home-theater option for someone who wants native Full HD, a source-labeled ANSI figure, and 3D input compatibility and who can place a projector at the documented distance. A person with little room depth should compare a genuine UST design instead; a buyer wanting built-in apps should plan an external HDMI streaming device and confirm current app support there. Its two HDMI inputs and zoom are practical only when their signal path fits the room. The right decision depends on throw and setup, not a promise of present availability or picture quality from the model sheet alone.
What else to compare
For wall-adjacent placement compare a documented UST projector; for higher native detail compare a verified 4K model whose throw fits the room.
Before you buy
Is the HD3300 native 4K?
No. Optoma specifies a native 1920 × 1080 Full HD panel.
Are its 2,000 lumens ANSI?
Yes. Optoma labels the HD3300 rating as 2,000 ANSI lumens.
Can it be placed directly under the screen?
Its 1.5–1.8:1 throw is conventional. Measure lens-to-screen distance and image width before mounting.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Optoma-authored HD3300 datasheet ↗ — checked October 10, 2026.
- Optoma HD3300 datasheet ↗ — checked October 10, 2026.
The decision
Choose the HD3300 for a measured conventional home-theater layout where native Full HD, ANSI-rated output, and compatible 3D inputs meet the need.
Is it the right fit?
Check the exact model and today’s offers on Amazon.