Our take
The Optoma EX330 is a light, older presentation projector whose brochure gives a specific XGA panel, throw range, and connection set. Its lumen figures are mode ratings without an ANSI basis, so compare the documented format and ports rather than treating those numbers as directly comparable output.
Basic presentation from a measured conventional distance when a 4:3 XGA image and separate audio plan are acceptable.
It is not for native widescreen video detail, close-wall mounting, integrated streaming, or a buyer who requires a verified ANSI rating or HDMI audio from the projector.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- Optoma specifies native XGA 1024 × 768, a 4:3 presentation format.
- At 1.1 kg, the brochure describes a light body and includes a carry bag.
- The connection panel includes HDMI image, VGA, S-Video, composite, and USB remote-mouse support.
What to weigh up
- The brochure's 2200/1700 lumen figures are not labeled ANSI and should not be compared directly with ANSI ratings.
- The HDMI input carries image only, so audio needs a separate path.
- Its 1.95–2.15:1 throw range is conventional, and a used lamp's hours or present output are not established by the brochure.
The key details
| Model covered | EX330 |
|---|---|
| Image format | Native XGA 1024 × 768, 4:3 |
| Rated light output | Mode ratings are not identified as ANSI lumens |
| Placement | Standard throw ratio: 1.95–2.15:1 |
Performance figures are manufacturer claims. Source checked October 9, 2026. Regional models and included accessories can differ.
What the features mean for you
When is the XGA 4:3 panel a useful fit?
Optoma lists native XGA 1024 × 768 in a 4:3 aspect ratio. That can suit older office slides and computer material that already use a traditional frame, keeping the image proportion aligned with the source. It has fewer native horizontal pixels than WXGA and Full HD models, so wide spreadsheets, fine text, and movie detail will show less information. A 1080p input does not make the panel native 1080p. Choose it for a basic presentation role where the source format and audience distance make XGA sufficient.
What do the brochure's brightness numbers mean?
The brochure lists 2200 and 1700 lumens for different modes, but it does not identify those values as ANSI measurements. Keep them in Optoma's own mode terminology; do not rank the EX330 above or below a model with an ANSI figure based on the bare number. The sheet also does not determine the output of a particular aged lamp. Presentation visibility depends on image size, screen gain, room light, and mode, so a buyer of a used unit should see an image at a practical size and inspect its lamp hours rather than infer current brightness from a brochure.
How should I measure the throw?
Optoma gives a 1.95–2.15:1 ratio and manual focus. That is a standard-distance lens rather than an ultra-short-throw setup. Use the intended screen width and ratio to estimate where the lens must sit, then leave room for focus and cable access. A manual focus control means framing and focus need to be adjusted at the projector. Do not confuse keystone correction or digital adjustment with optical lens shift. A small meeting room with a screen near the projector shelf may need a shorter-throw design instead.
Does its input panel match a presentation kit?
The brochure lists VGA, S-Video, composite, and HDMI, plus USB for remote-mouse connection. It specifically describes HDMI as image only, so sound must come from a computer, powered speaker, or another audio path. That distinction can change setup in a room where one HDMI cable was expected to carry everything. It is a wired presentation device, not a streaming platform. Check adapter needs for older computers and modern laptops, and test each port on the exact used unit before relying on it for a meeting.
Who should choose a different presentation model?
The EX330 is a candidate when the room favors portability, a conventional throw, and 4:3 XGA content. Epson VS210 is an SVGA alternative with Epson's separate color and white measurement methods; BenQ MP522 is another XGA model with a different input set. If native widescreen detail or a comparable ANSI brightness value is essential, choose a model whose exact document specifies those attributes. The EX330 brochure does not establish the life left in an old lamp or today's offer contents, so verify condition, remote, bag, cables, and audio separately.
What else to compare
Epson VS210 provides SVGA with separate IDMS/ISO light-output figures; BenQ MP522 offers XGA and analog inputs, while both have different connection tradeoffs.
Before you buy
Are the EX330's 2200 lumens ANSI?
The brochure lists 2200/1700 mode lumens but does not identify them as ANSI ratings.
Does HDMI carry sound?
Optoma describes the EX330 HDMI connection as image only, so plan a separate audio path.
Is it a native widescreen projector?
No. The brochure specifies native XGA 1024 × 768 in a 4:3 aspect ratio.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Optoma EX330 official product brochure ↗ — checked October 9, 2026.
- Optoma EX330 official brochure ↗ — checked October 9, 2026.
The decision
Choose the EX330 for a light, wired XGA presentation role only when its 4:3 detail, mode-based output figures, throw distance, and separate audio path are acceptable.
Is it the right fit?
Check the exact model and today’s offers on Amazon.