Our take
NEC's NP100 is a lamp-based, single-chip DLP projector specified at native SVGA 800 × 600 and 2,000 ANSI lumens under ISO 21118. Its 1.95–2.15:1 projection factor and manual focus support a conventional fixed or table-mounted arrangement. NEC introduced the NP100 for small businesses, home offices, and education; its VGA, composite, and S-Video inputs are consistent with an older wired equipment set. The exact source sheet is useful for identifying the model, but its 4:3 image and lack of listed HDMI narrow the jobs it should be asked to do.
Small-office slides or older computer/video sources when ANSI-rated output and predictable standard-throw placement matter more than native HD detail.
It is not a native HD movie projector, a close-wall installation model, or a direct HDMI streaming screen. Buyers who need modern digital ports should plan an appropriate external converter or choose a newer model.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- NEC's model-specific sheet specifies native SVGA and an ANSI-labeled 2,000-lumen rating.
- The throw range makes it possible to plan a conventional room layout before mounting.
- VGA, composite video, S-Video, and audio cover several older computers and AV sources.
What to weigh up
- 800 × 600 native pixels and a 4:3 shape limit detail and fit for widescreen video.
- The listed input set is legacy and does not include HDMI.
- Its 180 W lamp makes current brightness and remaining life dependent on the specific unit.
Specifications and exact model details
The key details
| Model covered | NP100 |
|---|---|
| Image format | Native SVGA 800 × 600 single-chip DLP |
| Rated light output | 2,000 ANSI lumens under ISO 21118 |
| Placement | 1.95–2.15:1 conventional projection factor |
Performance figures are manufacturer claims. Source checked October 15, 2026. Regional models and included accessories can differ.
Full review: how the features affect your choice
What the features mean for you
SVGA favors older documents over fine modern detail
NEC lists an 800 × 600 native image in a 4:3 format. That is a practical match for older office files, basic diagrams, or computer sources built around standard XGA-era display modes, but small type and dense spreadsheets will not look as detailed as they do on WXGA or Full HD panels. A source may accept a more recent signal and scale it down, so input compatibility should not be confused with native image resolution. Before choosing the NP100 for teaching, check that the text and graphic size remain readable from the farthest seat.
Use the ANSI output with its stated test basis
NEC specifies 2,000 ANSI lumens and associates the measurement with ISO 21118. That gives buyers a stated output basis that is more comparable than an unspecified lumen claim. It does not guarantee how bright a used NP100 looks: the lamp may be aged, the projector may be in an economy mode, and a large screen spreads light across more area. Ask for the lamp-hour menu and inspect a white and a color image. If the room is bright, test the intended screen size rather than assuming the label alone solves ambient-light problems.
Conventional throw needs a distance check
The NP100 datasheet gives a 1.95–2.15:1 projection factor, a conventional ratio that calls for meaningful separation between projector and screen. Measure the intended image width and lens distance before building a shelf or ceiling mount. Manual focus does not change the geometry, and digital keystone should not be treated as a substitute for correct alignment. The ratio also provides a clear reason not to label the model ultra-short-throw. Choose another placement class when the projector must sit directly beside a wall or in front of a teaching board.
Plan around VGA and older AV inputs
NEC's source list includes VGA, composite video, S-Video, and audio inputs; HDMI is not listed. That can be useful when a legacy computer or analog source remains in service, but a modern laptop or streaming stick usually needs a compatible conversion path. Check the signal timing and adapters before purchase, because a port that looks similar does not guarantee the right electrical format. The saved model sources do not establish a built-in streaming platform. Treat the NP100 as a display for an external source, not an all-in-one smart projector.
Lamp and fan condition matter for a used unit
NEC specifies a 180 W lamp and AC power. That identifies the light-source type and rules out battery operation, but a model-level specification cannot verify a seller's lamp hours, fan noise, or cooling condition. Ask to see the menu with the lamp counter and check that it starts without warnings. Inspect the air path, lens, focus response, and image uniformity after the projector warms up. Confirm that the remote and any needed source cables are present. Its manual can explain operation, but the offer itself still needs a condition check.
Compare for your needs
Proxima X350 offers native XGA instead of SVGA but is specified at 1,100 ANSI lumens; compare both against the actual screen and source.
Find the video projector that fits you.
Tell us what matters. We’ll help you weigh the options.
Before you buy
What is the NP100's native resolution?
NEC specifies 800 × 600 SVGA; higher input formats are scaled to that native image.
Does its brightness use ANSI lumens?
NEC specifies 2,000 ANSI lumens under ISO 21118 for the NP100 model.
Can an HDMI source connect directly?
The saved NP100 input list includes VGA, composite, and S-Video, but does not list HDMI.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources and review basis
Sources & review basis
We use the linked product documentation for the features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Sharp/NEC NP100 datasheet ↗ — checked October 15, 2026.
- NEC NP100 datasheet ↗ — checked October 15, 2026.
- NEC NP100/NP200 user manual ↗ — checked October 15, 2026.
- NEC NP100 and NP200 launch information ↗ — checked October 15, 2026.
The decision
Choose NP100 for a documented legacy wired role only after the room distance, analog ports, and lamp condition are confirmed.
Is it the right fit?
Check the exact model and today’s offers on Amazon.