Our take
Sharp Imaging and Information's NEC page identifies NP-P501X as a discontinued installation projector and lists native XGA 1024 × 768 in a 4:3 format. It gives 1.7× optical zoom, a 1.3–2.2 throw ratio, a 5,000-lumen output figure, and HDMI, VGA, composite, S-video, USB, and wired LAN. The source does not label the light figure ANSI, so it should not be used as an ANSI match. The body weighs about 4.1 kg and uses a lamp. This model makes sense when the room and legacy content match its format and an installer can confirm the exact throw position, lamp condition, and working connections.
A fixed presentation installation that can use 4:3 XGA and has a measured position within the published throw range.
It is not a native widescreen or Full HD choice, and its unqualified lumen rating cannot satisfy a documented ANSI brightness requirement.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- Sharp/NEC specifies native XGA 1024 × 768 and a 4:3 image.
- The 1.3–2.2 throw range and 1.7× zoom support measured installation planning.
- HDMI, VGA, composite, S-video, USB, and wired LAN are listed on the exact-model page.
What to weigh up
- The 5,000-lumen figure has no ANSI label in the checked product page.
- Its XGA 4:3 panel has less widescreen detail than native WXGA or Full HD models.
- A used lamp, connection board, remote, and installation package need exact-unit checks.
The key details
| Model covered | NP-P501X |
|---|---|
| Image format | Native XGA 1024 × 768 in a 4:3 image |
| Rated light output | 5,000-lumen manufacturer rating; the checked page does not label it ANSI |
| Placement | 1.7× optical zoom, 1.3–2.2 throw ratio, approximately 4.1 kg, and broad wired inputs |
Performance figures are manufacturer claims. Source checked October 10, 2026. Regional models and included accessories can differ.
What the features mean for you
Use the exact NEC installation model
The official Sharp Imaging and Information page names NP-P501X and marks the model discontinued. Exact identity matters because NEC's P-series includes products with different panel formats, lenses, and connection sets. The page gives model-specific information for this projector rather than requiring a guess from a historical listing title. It identifies a lamp source and a body weight of about 4.1 kg, pointing toward a room installation with a stable support rather than a carry-between-rooms routine. A buyer should compare the label on a used unit with the full NP-P501X model name and avoid transferring specifications from another P-series projector.
Match XGA and 4:3 to the material on screen
NP-P501X has a native 1024 × 768 image in 4:3. That format can suit legacy slides and data sources built around a squarer canvas, but it gives less native widescreen detail than WXGA 16:10 or Full HD 16:9 projectors. A widescreen movie may be displayed with unused areas or scaling depending on the source and screen. The decision should follow the existing content and audience distance. Fine text on a large screen needs more pixels than XGA can provide. Check the intended computer output and aspect settings before choosing this projector as a replacement for a newer widescreen room.
Measure the lens range before mounting
Sharp/NEC lists a 1.3–2.2 throw ratio and 1.7× optical zoom. These provide useful bounds for calculating image width at a planned lens-to-screen distance. Zoom gives room to adjust framing within a finite range, but it is not lens shift and does not make the projector ultra-short-throw. The source does not establish a lens-shift feature. Measure the screen, projector position, image center, and mounting height, then use the installation manual to confirm offsets and clearance. A 4.1 kg chassis also needs a secure shelf or mount. Do not commit to drilling a ceiling until the exact lens table confirms the fit.
Read the output figure with its stated method
The official page lists 5,000 lumens, but the saved source does not label that number ANSI. It remains a manufacturer light-output specification, not a comparable ANSI figure and not a measurement of a current unit. Room light, screen size, picture mode, and lamp age change the image. An older projector may have accumulated many hours or developed dust, discoloration, or uneven focus. If brightness is important, ask for the unit's lamp-hour display and a demonstration on a screen of similar size and gain. Keep the method limitation in the comparison rather than translating an unspecified lumen number into ANSI.
Wire the room and verify the used package
The page lists HDMI, VGA, composite, S-video, USB, and wired LAN. That set can help integrate a mixture of current digital and older analog equipment, while the LAN connection may support control or network functions described in the full manual. It does not establish an integrated subscription-streaming platform. Confirm which port carries audio, what the USB connection does, and whether the source equipment can output a compatible mode. Inspect each port, the zoom ring, focus, lamp, filter, remote, power cable, and any installed mount hardware. The historic candidate ASIN does not prove that an Amazon offer today is this exact unit or includes the listed accessories.
What else to compare
Before you buy
Is the NEC NP-P501X native Full HD?
No. Sharp/NEC lists native XGA 1024 × 768 in a 4:3 format for this model.
Can 5,000 lumens be treated as 5,000 ANSI lumens?
No. The checked Sharp/NEC product page does not label its 5,000-lumen specification ANSI.
How should I check whether it fits a room?
Use its 1.3–2.2 throw ratio and 1.7× zoom with the screen width and exact installation table.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Sharp Imaging and Information NEC NP-P501X product page ↗ — checked October 10, 2026.
- Sharp Imaging and Information official NEC NP-P501X product page ↗ — checked October 10, 2026.
The decision
Sharp Imaging and Information's NEC page identifies NP-P501X as a discontinued installation projector and lists native XGA 1024 × 768 in a 4:3 format. It gives 1.7× optical zoom, a 1.3–2.2 throw ratio, a 5,000-lumen output figure, and HDMI, VGA, composite, S-video, USB, and wired LAN. The source does not label the light figure ANSI, so it should not be used as an ANSI match. The body weighs about 4.1 kg and uses a lamp. This model makes sense when the room and legacy content match its format and an installer can confirm the exact throw position, lamp condition, and working connections.
Is it the right fit?
Check the exact model and today’s offers on Amazon.