Our take
Jilong/Avenli's 20411 is a low-profile Single airbed with a documented 75 × 29 × 9-inch footprint, 24 coil beams, and a listed 220 lb limit. Its clearest use is a one-person sleeping surface where a 29-inch width is enough and the buyer can supply a separate pump. That narrow width is the main trade-off: it is not a standard Twin, and the roughly 8.7-inch surface is much lower than the framed or raised beds elsewhere in this guide. The frozen title's Globo 20308 code and the manufacturer's 20411 item number appear to refer to the same EAN-backed Single; the current Amazon offer remains unverified.
Consider it for one sleeper who wants a narrow, low-profile airbed and already has or will supply a compatible pump. Choose a Twin or a taller raised model if you need more width, a built-in pump, or a documented 250 lb limit..
Skip it if you need standard Twin width, a raised guest-bed height, an included pump, or a documented load limit of at least 250 lb. Do not use the historical ASIN as a direct product link; its current Amazon page could not be read.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- Jilong's catalog lists the Single at 191 × 73 × 22 cm, 24 coil beams, and 100 kg / 220 lb loading weight.
- The maker describes a flocked top, safety valve, folding for storage and travel, indoor/outdoor use, and an included repair patch.
- The 29-inch width makes this a distinct narrow-Single choice instead of another Queen or raised guest-bed variant.
What to weigh up
- Its 29-inch width is much narrower than the 39-inch Twin width shown in the same Jilong catalog.
- The documented package does not include a pump, so inflation equipment is a separate purchase or item to bring.
- The 220 lb manufacturer-listed maximum does not meet the guide's 250 lb hard filter, and the current Amazon offer is unknown.
The key details
| Model covered | 20411 (JL020411N in retailer references; historical title uses Globo 20308) |
|---|---|
| Sleeping format | Low-profile airbed |
| Sleep size | Single: 75 × 29 in (191 × 73 cm) |
| Inflation | Separate pump; no pump included |
Performance figures are manufacturer claims. Source checked October 7, 2026. Regional models and included accessories can differ.
What the features mean for you
Reconcile the Globo and Jilong model codes
The frozen source row names a Globo Toys Summer Flock Mattress with code 20308 and gives the historical ASIN B00AFC1EDA. A readable OdKarla item record identifies that ASIN as a Jilong 20308 Avenli Camp mattress and lists EAN 6926799203085. Lechpol's Avenli product sheet assigns that same EAN to item 20411, and Jilong's catalog lists item 20411 as a Single at 191 × 73 × 22 cm. The shared EAN and matching dimensions support a crosswalk between the frozen listing and the Jilong/Avenli Single. They do not make 20308 the manufacturer's catalog item number: preserve both labels when searching, and check the product label. This distinction also keeps it separate from the Twin JL020334N and Double Jilong models in the saved research. Another unrelated candidate uses the bare number 20411 without a Jilong identity crosswalk, so a code alone is not enough to merge it.
Treat Single as narrower than Twin
The maker lists this mattress at 191 × 73 cm, about 75 × 29 inches. In the same catalog, the Twin is 191 × 99 cm, about 75 × 39 inches. The Single is therefore roughly 10 inches narrower while keeping a similar listed length. That footprint can work when floor width is limited and one sleeper accepts a narrow surface; it can be a poor fit when a shopper means a U.S. Twin by 'single bed.' The finder records the size as Single and keeps it out of a Twin must-have. Measure the available area and compare it with the full inflated footprint, not just the package size. The source does not establish sheet dimensions or compatibility with standard Twin bedding.
A low profile changes the setup
Jilong lists the bed at 22 cm high, approximately 8.7 inches, and describes it as a coil-beam airbed. That is a low-profile mattress rather than the 18- to 24-inch raised alternatives or the 20.25-inch framed SereneLife. The lower surface can be easier to store and carry after deflation, and the catalog says the bed folds for storage and travel. It does not provide a comparative comfort result, insulation rating, or evidence that the lower profile is suitable for every floor or outdoor surface. Its flocked top is a maker-described soft surface; that material description should not be read as a measured softness or sleep-quality test.
Bring a separate pump
The Jilong catalog's standard Single entry lists a repair patch and color box but no pump, and a Jilong JL20411 product profile expressly lists the model without one. Plan to bring a compatible external pump before relying on it for a guest or campsite setup. The product has a safety valve that Jilong says helps inflate and deflate quickly, but the sources do not document a pump, an inflation time for this exact item, or which adapters fit. A valve is not an inflator. If an integrated pump is important, compare it with the SereneLife frame bed or one of the sourced Intex raised models; if you already own a pump, this model's documented no-pump configuration may be acceptable.
Use the 220 lb figure as a stated limit
Jilong's table lists 100 kg / 220 lb as the Single model's loading weight. This makes the model eligible for a documented 220 lb minimum, but not for the guide's stricter 250 lb requirement. The figure is a manufacturer specification, not a load test performed for this review, and it does not predict comfort, long-term air retention, or support for a particular sleeper. If a stated capacity is a hard condition, compare the exact rating with the user's total load and follow the manual supplied with the item. The finder leaves the product out when a 250 lb minimum is selected rather than treating the value as unknown or rounding it upward.
Outdoor wording has limits
Jilong describes the flocked coil-beam airbed range as convenient for indoor and outdoor use. That supports considering it for a dry, suitable camping or guest setting, but the catalog does not spell out ground preparation, moisture exposure, temperature limits, insulation, or water use. The listing is an airbed, not a sleeping pad with a documented thermal rating. Use a clean, flat surface, protect the vinyl from sharp objects, and consult the instructions for the exact item before taking it outside. No broader weather-proof or aquatic-use claim is supported by the material reviewed here.
Confirm the Amazon offer by model and EAN
The historical ASIN is readable on an external listing that names Jilong 20308 and EAN 6926799203085, but direct retrieval of Amazon B00AFC1EDA returned a cache miss. That old ASIN evidence helps reconcile the source row; it does not prove a current Amazon offer, seller, price, color, or package. Use the tagged search for Jilong/Avenli 20411 Single and compare the current product label, dimensions, pump contents, and EAN where available. Current price, stock, shipping, warranty, durability, and comfort are not assessed here. This is a source-based buying comparison, not a hands-on review or a summary of customer reviews.
What else to compare
Before you buy
Is this the same width as a Twin?
No. Jilong lists the Single at 73 cm / about 29 inches wide and its Twin at 99 cm / about 39 inches wide. Treat the Single as a narrower format.
Does the Jilong/Avenli Single include a pump?
The Jilong model entry and a JL20411 product profile list no pump. Plan to supply a compatible external pump and confirm the exact seller package.
What load limit does Jilong list?
The 2022 catalog lists 100 kg / 220 lb for item 20411. It is a published specification, not a durability or comfort test.
Can I use it outdoors?
Jilong describes the airbed for indoor and outdoor use, but the reviewed catalog does not give ground, weather, water, or insulation limits.
Is historical ASIN B00AFC1EDA a current Amazon link?
No current Amazon page could be read. An external item record ties the historical ASIN to Jilong 20308 and the matching EAN, but the current offer remains unverified; use the tagged model search.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Jilong Relax 2022 catalog ↗ — checked October 7, 2026.
- Jilong Relax 2022 catalog ↗ — checked October 7, 2026.
- Lechpol Avenli Single product sheet ↗ — checked October 7, 2026.
- OdKarla Jilong 20308 Avenli Camp item record ↗ — checked October 7, 2026.
- E-Katalog Jilong JL20411 model profile ↗ — checked October 7, 2026.
- Historical Amazon ASIN from source row 897 ↗Paid link · We may earn a commission. — checked October 7, 2026.
The decision
Jilong/Avenli's 20411 is a low-profile Single airbed with a documented 75 × 29 × 9-inch footprint, 24 coil beams, and a listed 220 lb limit. Its clearest use is a one-person sleeping surface where a 29-inch width is enough and the buyer can supply a separate pump. That narrow width is the main trade-off: it is not a standard Twin, and the roughly 8.7-inch surface is much lower than the framed or raised beds elsewhere in this guide. The frozen title's Globo 20308 code and the manufacturer's 20411 item number appear to refer to the same EAN-backed Single; the current Amazon offer remains unverified.
Is it the right fit?
Check the exact model and today’s offers on Amazon.