Our take
Consider the X2 only when its exact connectors fit the equipment and a used lamp projector is acceptable. Its 800 × 600 image is not a modern home-theater substitute.
A secondhand setup that already supports legacy video connections.
It is not for HDMI-only sources, native Full HD or 4K, portable use, or buyers unable to inspect lamp condition.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- The original sheet identifies native SVGA resolution and the X2 model.
- Manual zoom and a published throw range aid conventional placement.
- The original brightness rating specifies an ANSI basis.
What to weigh up
- The discontinued model has no HDMI input listed.
- Original and later brightness and lamp-life figures differ.
- A current matching Amazon offer is not verified.
The key details
| Model covered | X2 |
|---|---|
| Image format | Native 800 × 600 SVGA DLP |
| Rated light output | 1600 ANSI lumens in the original standard-mode sheet |
| Placement | 1.89–2.27 throw ratio; M1-DA, S-Video and composite |
Performance figures are manufacturer claims. Source checked October 4, 2026. Regional models and included accessories can differ.
What the features mean for you
Expect an older 4:3 image
InFocus’s original sheet identifies the X2 as a single-chip DLP projector with native 800 × 600 SVGA resolution. That 4:3 format fits older computer presentations and standard-definition sources better than detailed modern film content. Higher-resolution inputs can be scaled, but the display cannot reproduce the extra pixels of native Full HD. Buyers should decide whether their equipment and material still suit this format before shopping for a used unit. The original sheet rates standard-mode output at 1600 ANSI lumens, while a later database lists 1700 and notes publication changes. This profile keeps the original dated figure and the revision uncertainty visible.
Use the lens range to plan a conventional position
The product sheet lists a 1.2× manual zoom and a 1.89–2.27 throw ratio. Those facts provide a starting point for checking whether the X2 can fill a screen from the available distance. They do not indicate ultra-short-throw placement or optical lens shift, and they cannot compensate for a poor mount position. Focus is manual, so the owner must adjust the lens and inspect clarity across the whole picture. Measure the room before buying, then leave space for ventilation and cables. A conventional projector position is more realistic than expecting the X2 to sit close to the screen.
Plan around the original connector panel
The InFocus guide and product sheet list M1-DA, S-Video, composite video, and stereo audio. M1-DA supported computer and video paths in its era, but it is not an HDMI socket. An HDMI-only laptop, console, or media box will need an adapter chain that is separately checked for signal resolution, copy protection, and audio. LiteShow wireless equipment is an optional accessory, not a built-in streaming platform. Identify the source device first and verify the precise adapter path. The analog connections can remain useful in a maintained legacy setup, but they are a real barrier for new equipment.
Lamp ratings do not describe a used unit
The original sheet describes a 200 W SHP lamp and a 4000-hour rating; a later database lists a 3000-hour figure and notes a specification revision. Neither number reveals the remaining life in a particular projector. Ask for the lamp-hour reading and a live picture, and inspect color, focus uniformity, fan noise, and shutdown behavior. Verify that the remote, power cable, and any needed M1 adapter are included. A rated life is not a maintenance guarantee, and the specific seller’s parts and return terms matter. This review uses public model documentation and makes no claim that an X2 was tested.
Match the X2 to a narrow secondhand use
The X2 may remain useful where an organization already owns compatible analog equipment and needs a replacement with known signal connections. It is not a broad recommendation for a new living-room theater because its resolution and connector set are dated and no current offer is confirmed. Use the tagged model search, compare the nameplate with the manual, and avoid assuming the historical ASIN points to a present listing. If the source chain requires multiple adapters, compare a modern HDMI projector first. The case for this model is compatibility with an existing legacy system, not equivalence to current Full HD devices.
What else to compare
For XGA and analog presentation inputs, compare ViewSonic PJ550; for modern native Full HD and HDMI, compare Epson Home Cinema 6100.
Before you buy
Does the X2 have an HDMI input?
The original sheet lists M1-DA, S-Video and composite connections, but no HDMI input.
Which brightness rating is used for matching?
The profile uses 1600 ANSI lumens from the original sheet and notes a later 1700-lumen revision.
Does a 4000-hour rating tell me a used lamp’s remaining life?
No. Check the unit’s lamp-hour reading and picture condition before purchase.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Original InFocus X2 product sheet ↗ — checked October 4, 2026.
- Original InFocus X2 product sheet, specifications ↗ — checked October 4, 2026.
- InFocus X2 user guide, model and connector sections ↗ — checked October 4, 2026.
- ProjectorCentral X2 model record and revision note ↗ — checked October 4, 2026.
The decision
The X2 is a legacy-connection option whose original ratings cannot predict an individual used unit.
Is it the right fit?
Check the exact model and today’s offers on Amazon.