Our take
The ScreenPlay 5700 is a specialized secondhand option for an older 16:9 video system. Its native resolution and analog connections matter more than higher-resolution inputs it accepts.
A legacy widescreen setup with compatible component or M1-DA equipment.
Avoid it for HDMI-only sources, fine detail, bright rooms, or buyers seeking a current all-in-one streaming projector.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- The manufacturer sheet specifies a video-optimized 1000 ANSI-lumen rating.
- Native 16:9 matches older widescreen video material.
- The throw range helps plan conventional placement.
What to weigh up
- Native resolution is standard-definition widescreen.
- The original connection panel does not list HDMI.
- Lamp and optical condition of a used unit are unknown.
The key details
| Model covered | SP 5700 |
|---|---|
| Image format | Native 1024 × 576, 16:9 Matterhorn DLP |
| Rated light output | 1000 ANSI lumens, video-optimized rating |
| Placement | 1.89–2.63 throw ratio; component, S-Video, composite and M1-DA |
Performance figures are manufacturer claims. Source checked October 4, 2026. Regional models and included accessories can differ.
What the features mean for you
The native widescreen format defines its niche
InFocus’s original ScreenPlay 5700 sheet lists a 1024 × 576 native image using Matterhorn DLP. The 16:9 shape suits widescreen video, but the pixel count is below modern Full HD. The projector can accept HDTV signals including 1080p, yet those signals are scaled to the native display. That distinction matters for subtitles, interface text, and detailed current content. A buyer maintaining an older media room may still value the image shape and known signal path; someone planning a new theater should compare native resolution first and avoid reading input compatibility as projected detail. These published specifications are not a hands-on assessment of any individual unit.
Brightness is rated for a video mode
The manufacturer sheet gives 1000 ANSI lumens optimized for video and a 1400:1 contrast ratio. The qualification should stay with the number; this is not described as a bright-room data model. The rating is a published specification, not a measurement of a used lamp. In a dark home-theater room, the widescreen shape may matter more than raw output. Ask for the unit’s lamp-hour reading and inspect the actual picture, since an old bulb’s condition can differ from its original rating. This profile uses the dated manufacturer sheet and does not invent a brightness result or guarantee a particular screen size.
Measure for a conventional throw
The product sheet lists a 1.89–2.63 throw ratio. That gives a planning range for conventional placement and rules out treating the model as ultra-short-throw. Digital keystone is not lens shift and does not let the projector sit directly beside the screen. The zoom ratio in later sources conflicts, so this guide does not assign one. Measure the room with the throw range, check that the lens can fill the desired screen, and keep the projector square to the surface. A sensible physical position is more dependable than expecting digital geometry correction to make up for an installation mismatch.
The source panel belongs to an earlier era
The original sheet lists component/D5, two S-Video connections, composite, M1-DA, HD15, RS-232, and 12-volt triggers. It does not list HDMI. M1-DA supported computer, DVI, HDTV, and USB paths through appropriate equipment, but a modern HDMI source may need a separately verified adapter for signal and audio. There is no documented built-in streaming platform. This projector is easiest to use when the room already has compatible video equipment. Before buying, list the sources and adapters needed; if the chain is inconvenient, an HDMI model is likely a better practical choice.
Check both lamp configuration and used condition
The original sheet describes either a 220 W UHP lamp rated for 3000 hours or a 250 W UHP lamp rated for 2000 hours. The exact configuration and remaining life in a sale are unknown. Ask for the lamp-hour reading and a demonstration of focus, color, fan operation, and each required input. Do not assume the remote, cables, lens cover, or optional adapter is included. This discontinued model has a narrow legacy role, so support and parts availability need seller-specific confirmation. No present stock claim or hands-on test is made; the recommendation follows from the original specifications and the limits they imply.
What else to compare
For a conventional XGA data projector, compare ViewSonic PJ550; for native Full HD and HDMI, compare Epson Home Cinema 6100.
Before you buy
Is the ScreenPlay 5700 native 1080p?
No. The original sheet lists native 1024 × 576; 1080p is accepted and scaled.
Does it have a standard HDMI input?
No HDMI appears in the original connection panel; the listed inputs are from an earlier era.
What zoom ratio should I use?
The saved sources conflict, so this profile leaves the zoom ratio unknown.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Original InFocus ScreenPlay 5700 product sheet ↗ — checked October 4, 2026.
- Original InFocus ScreenPlay 5700 product sheet ↗ — checked October 4, 2026.
- ProjectorCentral SP 5700 model record and revision fields ↗ — checked October 4, 2026.
The decision
The ScreenPlay 5700 fits only when a compatible legacy source chain and its low native resolution suit the room.
Is it the right fit?
Check the exact model and today’s offers on Amazon.