Our take
HP maps product number 1PV88A#BGJ to the LaserJet Enterprise M507x, a monochrome print-only printer rated up to 45 pages per minute in standard mode and 52 in high-speed mode. The exact page lists automatic duplex, built-in dual-band Wi-Fi and Wi-Fi Direct, Ethernet, and three standard trays with 100, 550, and 550 sheets. HP recommends 2,000 to 7,500 pages per month. These are product specifications, not a claim about a particular seller's current stock, toner, page count, or used condition.
A wired or wireless office needing a dedicated monochrome queue, automatic two-sided printing, and a stated 2,000–7,500 page monthly workload band..
Choose an MFP instead if copy, scan, or fax must be part of this machine, or avoid it if your routine is below the documented business-volume range.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- HP identifies the exact M507x part and documents automatic two-sided printing.
- Built-in dual-band Wi-Fi and Ethernet allow wireless or wired placement.
- Three standard trays and a 2,000–7,500 monthly recommendation support an office queue.
What to weigh up
- The M507x is print-only and cannot replace an all-in-one workflow.
- The recommended range describes intended workload, not current machine life or toner state.
- The old Amazon candidate is not proven to map to a current exact ASIN.
The key details
| Model covered | M507x |
|---|---|
| Main functions | Print only |
| Print output | Monochrome; up to 45 ppm standard and 52 ppm high-speed |
| Two-sided printing | Automatic duplex; Wi-Fi and Ethernet; three standard trays |
Performance figures are manufacturer claims. Source checked October 9, 2026. Regional models and included accessories can differ.
What the features mean for you
A dedicated monochrome print queue
HP identifies the M507x as a monochrome laser printer rather than a multifunction device. It prints but does not provide the copy, scan, or fax functions listed on HP's separate MFP pages. That focused role can make sense where a team already has document capture handled elsewhere and wants one printer for routine black text. The exact product number matters because other M507 suffixes have different network and tray configurations. Ask for a clear model-label image before treating a marketplace description as the M507x.
Automatic duplex is part of the documented model
HP lists standard automatic duplex for the M507x. The printer can turn paper during a two-sided job, removing the need to manually reinsert a stack between pages. That helps recurring reports, internal documents, and other longer jobs where page order matters. The specification confirms the designed function, not the condition of a used duplex path. Request a two-sided sample and check the specific unit for feed errors, skew, and matching configuration before relying on it for daily production.
Use the exact connectivity distinction
The M507x product page documents built-in dual-band Wi-Fi, Wi-Fi Direct, Ethernet, and USB. This combination gives a buyer more placement choices than a wired-only base printer, while Ethernet can still serve as the stable path for a shared office queue. Wi-Fi Direct is a device-to-device option and does not replace normal wireless network configuration. Verify the radio and network setup on the unit itself, especially if the listing reuses a general M507-series description or includes an aftermarket network module.
Three trays create a larger standard paper reserve
HP lists three standard input trays for the M507x: a 100-sheet multipurpose tray and two 550-sheet trays. The combined reserve can separate everyday stock from special media and reduce refill interruptions in a shared location. Confirm that all three trays are physically included, because optional tray descriptions from another M507 model should not be carried into this exact configuration. Capacity is not a recommendation for monthly volume and does not prove the machine will feed all paper types reliably in its present condition.
Match routine pages to the manufacturer's range
HP recommends 2,000 to 7,500 pages per month for the M507x. That range gives a workload comparison for an office that has a measured monthly need; a maximum duty-cycle figure is a different kind of limit and should not be used as a target. The recommended band does not establish remaining service life, current consumables, or the economics of a used unit. Estimate the office's ordinary output and compare it with the range before choosing this enterprise printer over a lower-volume desk model.
What else to compare
Compare an MFP when document capture or fax belongs at the same station, or a smaller printer when your ordinary monthly volume is below this range.
Before you buy
Does the M507x print on both sides automatically?
Yes. HP lists standard automatic duplex printing for the M507x configuration.
Does the M507x include built-in Wi-Fi?
Yes. HP documents dual-band wireless networking on the exact M507x product page, in addition to Ethernet.
What monthly amount does HP recommend?
HP recommends 2,000 to 7,500 pages per month for the M507x; this is separate from maximum duty cycle.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- HP U.S. LaserJet Enterprise M507x exact product page and specifications ↗ — checked October 9, 2026.
- HP U.S. M507x exact product number, interfaces, duplex, trays, and recommended monthly volume ↗ — checked October 9, 2026.
The decision
The M507x fits a dedicated business print queue that can use its duplex, network choices, and tray reserve; verify the exact part and condition before buying.
Is it the right fit?
Check the exact model and today’s offers on Amazon.