Our take
The Beam V3 suits a portable phone-centered setup when portrait projection, electrical 2D correction, and a compact source path are priorities. Its 200-ANSI rating, conventional throw, and AC-only operation set clear limits; plan a darker space and a suitable power source rather than reading its LED-lumen marketing number as ANSI.
Phone-based portable viewing where portrait projection and wireless mirroring matter more than high brightness.
It is not for bright-room projection, battery-only travel, native Full HD, a very close screen wall, or someone who expects a self-contained current streaming-app platform.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- EZCast identifies 720p output and 200 ANSI lumens for Beam V3.
- Portrait projection and electrical 2D keystone address mobile content and placement adjustment.
- HDMI, USB, SD, and an optional Wi-Fi-adapter route support multiple source types.
What to weigh up
- The 200 ANSI rating is modest and does not promise a daylight image.
- A 1.5:1 throw still needs lens-to-screen distance.
- AC power and adapter-based mirroring are less self-contained than a battery projector with integrated apps.
The key details
| Model covered | Beam V3 |
|---|---|
| Image format | 720p output, 1280 horizontal pixels |
| Rated light output | 200 ANSI lumens |
| Placement | Conventional throw, 1.5:1 |
Performance figures are manufacturer claims. Source checked October 9, 2026. Regional models and included accessories can differ.
What the features mean for you
What can portrait projection do?
EZCast describes Beam V3 as a mobile-phone projector with manual portrait projection. That orientation can use more of the projected area for upright phone content instead of leaving a wide horizontal frame around a vertical image. It may suit selected clips or mirrored phone pages, but it does not make every app, video format, or operating system behave identically. Verify the phone's output method and choose an orientation before settling the projector on its stand. Portrait use also needs clearance for ventilation and a stable base, as the manual's setup instructions describe.
Is the 200 ANSI rating enough?
The EZCast model comparison lists 200 ANSI lumens for Beam V3. That is a stated method, unlike the much larger 10,600 LED-lumen marketing figure in the candidate title, which should not be substituted or compared as ANSI. The model rating is modest and suits a darker viewing environment more than a room with substantial ambient light. Image width, surface, and setup also affect visibility. If a brighter picture is required, compare models with higher explicit ANSI ratings and make sure their throw and power needs fit the same room.
How much distance and correction will it need?
EZCast lists a 1.5:1 throw ratio and manual focus for Beam V3. Its electrical 2D keystone can adjust image geometry horizontally and vertically, which can help a mobile setup, but it does not turn the lens into ultra-short-throw optics or optical lens shift. Measure the distance needed for the planned width and keep the projector level where possible. The 35–150-inch size range is a model capability, not a guarantee that the largest size will be bright enough in the room. Focus and alignment still matter at each position.
What do wireless and wired inputs provide?
The V3 documentation lists HDMI, USB, SD, and a socket for a Wi-Fi adapter; the projector uses an EZCast multimedia center. Those routes can support mirroring or local media without assuming a current Android app platform. A separate adapter is part of the documented wireless path, so check package contents and phone compatibility. HDMI can connect a laptop or external player, and a 5 W speaker is listed for basic sound. The Beam V3 has no built-in battery in its comparison table and uses AC input, so outdoor placement still requires a suitable power source.
Who should choose another portable model?
Beam V3 is most differentiated by its portrait-phone use, not resolution or battery life. Emotn C1 also provides native 720p and multiple wired inputs, but its exact manual does not give an ANSI figure; EZCast lists 200 ANSI for the V3. WEMAX Dice raises native output to Full HD, adds Android TV and battery operation, but has greater size and runtime descriptions that vary by mode. Select V3 when phone orientation and its stated 200-ANSI output fit a dark portable setting. Choose another model when brightness, battery use, or native image detail is the harder requirement.
What else to compare
Emotn C1 also offers HD output with HDMI/VGA and Wi-Fi mirroring but has no ANSI figure in its manual; WEMAX Dice adds Full HD, Android TV, and a built-in battery with different size and runtime tradeoffs.
Before you buy
Is the 10600 LED-lumen claim an ANSI figure?
No. EZCast's model comparison lists 200 ANSI lumens; the LED-lumen marketing number is a different basis.
Can the Beam V3 run without an outlet?
The model comparison lists no battery and specifies an AC adapter power input.
Does it include Android TV apps?
The saved sources describe an EZCast multimedia center and adapter-based mirroring, not an Android TV platform.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- EZCast Beam V3 product page ↗ — checked October 9, 2026.
- EZCast Beam V3 product page ↗ — checked October 9, 2026.
- EZCast Beam V3/H3 user manual ↗ — checked October 9, 2026.
- EZCast Beam projector model comparison ↗ — checked October 9, 2026.
The decision
Choose Beam V3 for portrait phone projection in a dim portable setting when AC power, 720p output, and 200 ANSI lumens fit.
Is it the right fit?
Check the exact model and today’s offers on Amazon.