Our take
The CLIVIA HLC-300 is a commercial continuous-feed vegetable cutter, not a batch bowl processor. Its exact Amazon page identifies the model and describes slicing and shredding from a dual-hopper feed system. It lists 550 W and 110 V, while leaving the exact 120-V / 60-Hz compatibility unconfirmed. The advertised five-disc set also conflicts with the included-components list, so the exact package needs checking.
A commercial-prep shopper who wants continuous-feed slicing and shredding and can verify the exact voltage and cutting-disc package..
Not for shoppers seeking a conventional work bowl, a dedicated dough blade, a verified 120-V / 60-Hz model, or a reconciled disc package without further seller confirmation.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- The exact item page identifies model HLC-300 and the B09744BPJH ASIN.
- The listing describes a dual-hopper continuous feed with slicing and shredding discs.
- A 3/4-hp / 550-W motor and angled pusher are stated on the exact page.
What to weigh up
- The listed 110-V rating and unstated frequency do not prove the strict 120-V / 60-Hz match.
- The title and bullets say five discs, while the component table lists four distinct widths.
- No work-bowl capacity, measured throughput, or dough attachment is documented.
The key details
| Model covered | HLC-300 |
|---|---|
| Main bowl capacity | Continuous-feed machine; no processor work-bowl capacity is listed |
| Small-batch bowl | No bowl-based small-batch vessel is listed |
| Slicing and shredding | Seller advertises slicing and shredding discs; exact five-disc package conflicts with the item-parts field |
| Special attachment | Dual-hopper feed-through format with an angled pusher and auto-stop claim |
| Dough blade | No dough blade is listed |
| Integrated cooking | No integrated heating or cooking function is described |
Performance figures are manufacturer claims. Source checked October 11, 2026. Regional models and included accessories can differ.
What the features mean for you
This is a feed-through cutter, not a batch bowl
The HLC-300 listing describes a dual-hopper continuous-feed machine for vegetables, fruit, and cheese. Ingredients are fed through the cutter instead of being processed inside a conventional work bowl. That distinction makes the format relevant when repeated slicing or shredding is the main job, but it gives no bowl-capacity number and does not define a small batch vessel. The profile keeps capacity unknown rather than treating the machine's dimensions or motor rating as an equivalent bowl size. Buyers who need to chop a batch in a sealed work bowl should compare a bowl processor. [bowlCapacityCups, handheldFeedThrough]
The listing describes both slicing and shredding
The exact page advertises two slicing disks and three shredding disks, which supports a mixed vegetable-prep role. Its included-components table, however, lists four distinct widths and does not repeat one width for the separate slicing and shredding operations. That mismatch prevents a clean claim about the exact five-piece set. The review retains the advertised functions but tells the buyer to confirm the number and identity of discs in the offered package. Nothing on the inspected page establishes a dicing grid, spiralizer, dough blade, or separate meat grinder. [sliceShred, dicingKit, doughBlade]
Electrical compatibility needs a closer check
The Amazon page states 110 V and 550 W, and the title describes a 3/4-horsepower motor. It does not state frequency in the checked specification fields. The finder asks whether the exact model is documented for 120 V / 60 Hz, so this 110-V listing does not satisfy that strict match as written. A shopper should check the unit's rating plate and seller documentation rather than assuming that an advertised commercial machine accepts a different supply. The result is an unknown voltage-match attribute, not a claim that the unit is unsafe or incompatible. [northAmericanVoltage]
A continuous-feed machine changes cleanup and setup
The exact page describes an angled work surface, dual feed openings, and an auto-stop pusher, along with a cast-aluminum body and belt drive. These are listing claims about construction and feed arrangement; they are not independent test results or guarantees of throughput. The page says hand wash only. Because it is not a bowl system, its cleanup centers on the hopper, pusher, and cutting discs, while a conventional processor uses its bowl and lid for chopping as well as disc work. The two formats should not be compared by cup capacity alone. [handheldFeedThrough]
Keep the exact code and advertised package together
The Amazon page's canonical URL, model field, and ASIN identify CLIVIA HLC-300 and B09744BPJH, so this product uses a tagged direct link. The model-specific page is still seller evidence rather than a manufacturer manual. Its title and promotional description conflict with the included-parts field about five discs, and no capacity or frequency is supplied. Do not transfer disc counts or motor facts from another CLIVIA or CMI cutter merely because the designs look similar. Confirm that the seller can provide the HLC-300 code and the actual disc list. [sliceShred, northAmericanVoltage]
Choose it when repeated feed-through prep is the priority
The HLC-300 may suit a commercial kitchen that mainly needs continuous-feed slicing and shredding, after its voltage and disc set are resolved. Robot Coupe R 101 P is a different commercial option: its documentation combines a 1.9-L cutter bowl with a separate vegetable-prep hopper and disc system. That bowl adds batch chopping and a documented 120-V version, while the HLC-300 is presented as a continuous-feed cutter without a work bowl. A buyer who needs both workflows should compare the combination unit; one who values the HLC-300's exact listing should confirm its 110-V electrical label and kit first. [handheldFeedThrough, northAmericanVoltage]
What else to compare
Compare Robot Coupe R 101 P if a documented cutter bowl plus a separate feed-hopper vegetable-prep attachment is more useful than a continuous-feed-only machine.
Before you buy
Does the HLC-300 have a processor bowl?
No work-bowl capacity is listed; the page describes a dual-hopper continuous-feed cutter.
How many discs are included?
The title and bullets advertise five, but the included-components field lists four distinct widths; verify the exact kit.
Is the HLC-300 documented for 120 V / 60 Hz?
No. The exact page says 110 V and does not state frequency, so the strict match remains unconfirmed.
Does the exact ASIN identify model HLC-300?
Yes. The exact Amazon page lists both HLC-300 and B09744BPJH; the included disc package still has a conflict.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Amazon exact-ASIN listing identifies CLIVIA HLC-300; seller-provided specs and part list retained with disc-count conflict ↗Paid link · We may earn a commission. — checked October 11, 2026.
- Exact Amazon page identifies CLIVIA HLC-300 / ASIN B09744BPJH, states 550 W and 110 V, describes dual hoppers and five advertised discs, and lists four distinct blade widths in included components. ↗Paid link · We may earn a commission. — checked October 11, 2026.
- Amazon US model listing checked October 11, 2026; current condition, price, and availability are confirmed by the seller.
The decision
Choose the HLC-300 only when continuous feed is the right workflow and the offered voltage and disc set are verified against the exact listing.
Is it the right fit?
Check the exact model and today’s offers on Amazon.