Our take
BenQ's LW500 is a business DLP projector with an exact native WXGA 1280 × 800 image, 2000 ANSI lumens, LED light source, 1.55–1.70:1 throw, and 1.1× zoom. The historical title calls it Full HD, but BenQ's model-specific specifications show the native panel is WXGA. That correction matters for slide detail and video. Its ANSI rating makes brightness comparisons more grounded than the unqualified lumen titles common in this category. The projector remains an external-source business device with AC power, not a battery unit or a built-in streaming platform.
Meetings and classrooms needing a business projector with LED illumination, ANSI output, and conventional zoomed placement.
Avoid it if native Full HD or 4K is required, the projector must run from a battery, or a fixed ultra-short-throw installation is essential.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- BenQ lists native 1280 × 800 WXGA and a separate ANSI rating for the exact LW500.
- The 1.55–1.70:1 throw and 1.1× zoom provide measurable placement flexibility.
- LED illumination and dual HDMI suit a simple meeting-room input setup.
What to weigh up
- The listing's Full HD text should not obscure the lower native WXGA resolution.
- The 2000 ANSI output is not a guarantee of daylight visibility at any image size.
- No battery or integrated app platform is documented for this business model.
The key details
| Model covered | LW500 |
|---|---|
| Image format | Native WXGA 1280 × 800 |
| Rated light output | 2000 ANSI lumens |
| Placement | 1.55–1.70:1 conventional throw with 1.1× zoom |
Performance figures are manufacturer claims. Source checked October 5, 2026. Regional models and included accessories can differ.
What the features mean for you
Correct the native format before choosing
BenQ lists the LW500 at WXGA 1280 × 800. That is the projector's native panel format even though the candidate listing title says Full HD 1920 × 1080. Inputs may accept higher signal resolutions, but they are scaled to the native image. WXGA can work well for slides, spreadsheets, and general business use; buyers who display fine text or watch Full HD film from close seating may prefer a native 1080p model. Check source scaling and screen size in the target room. This review follows BenQ's technical table rather than repeating marketplace wording.
Use the ANSI figure as one brightness criterion
BenQ specifies 2000 ANSI lumens for LW500. The named basis permits comparison with other products that also state ANSI, but it does not promise that a large image will be clear in every bright environment. Screen area, room light, image mode, wall color, and use all affect the result. Epson's color and white lumen measures or an unqualified seller number should not be compared directly as though they were the same test. Decide on the viewing size and ambient-light control first, then use 2000 ANSI as one input. No personal brightness measurement is claimed here.
Measure the lens range for a meeting room
The exact BenQ specifications give a 1.55–1.70 throw ratio and 1.1× zoom. This is conventional placement, not an ultra-short-throw design. Measure the lens-to-screen distance and intended screen width at both zoom ends before selecting a table or ceiling mount. The model page lists vertical keystone correction, but that does not establish optical lens shift. Start with the projector square to the screen and reserve space for AC, HDMI, control, and ventilation. These specifications give a planning range; they do not verify that an existing room will fit without measuring.
Use LED illumination with realistic ownership expectations
BenQ identifies an LED source and lists different rated lifetimes by operating mode. That is useful for a buyer considering maintenance compared with a lamp projector, but source lifetime is a published model rating, not a warranty of a used unit's current condition. Check focus, color uniformity, fan, input ports, and the model number on any existing projector. LW500 operates from AC power and is not marked as portable with a battery. The business design is most relevant to a stable room setup where the source devices, screen position, and outlet are already part of the meeting plan.
Keep the source device separate from the projector
BenQ describes dual HDMI inputs and USB power for a device, along with serial control for system integration. These make it straightforward to attach a laptop or external streaming player, but do not mean that apps are installed on LW500. For streaming, verify the player, its power, network, and protected-video support independently. For office slides, confirm that adapters and audio work with the selected computer. The review does not assume an included wireless dongle or current package contents. The exact product page distinguishes optional accessories from the projector itself, which is important when comparing a search result.
What else to compare
Epson PowerLite 98 offers XGA with its own documented throw, while Epson Pro EX10000 raises native output to Full HD and uses a laser source.
Before you buy
Is the BenQ LW500 native Full HD?
No. BenQ's exact specifications list native WXGA 1280 × 800; the historical listing's Full HD claim is not the native format.
How bright is it by ANSI measurement?
BenQ lists 2000 ANSI lumens for LW500.
What is the throw range?
BenQ specifies a 1.55–1.70:1 throw ratio with 1.1× zoom for conventional placement.
Does the LW500 have built-in streaming apps?
BenQ documents HDMI inputs and USB power, not an integrated protected streaming-app system.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- BenQ LW500 official specification and product pages ↗ — checked October 5, 2026.
- BenQ LW500 exact specifications ↗ — checked October 5, 2026.
- BenQ LW500 business product page ↗ — checked October 5, 2026.
- BenQ LW500/LW500ST/LH500 family manual ↗ — checked October 5, 2026.
The decision
LW500 is a measured business-room choice when WXGA is adequate and its 2000 ANSI figure and conventional lens fit the plan.
Is it the right fit?
Check the exact model and today’s offers on Amazon.