Our take
Beam V1 is a distinctive projector-and-light combination for someone who specifically wants a socket-mounted installation and understands its older software and modest image specification. The manufacturer lists 854 × 480 output and 100 lumens, without identifying an ANSI method.
A light-socket installation for small, controlled-light projection.
It is not a bright-room cinema projector, a high-detail Full HD display, a battery-powered portable unit, or a dependable choice for current streaming apps without compatibility checks.
Pros & cons
What could work for you, and what to consider before buying.
What works in its favor
- The E26/E27 socket format gives the V1 a different ceiling installation from a conventional projector mount.
- The sheet documents Android, Wi-Fi, Bluetooth, internal storage, and two 2 W speakers.
- The manufacturer describes a combined projector and light with low listed power use.
What to weigh up
- Native output is 854 × 480, and 100 lumens is not identified as ANSI.
- The sheet's Android 4.2 and upgradeable 4.4 platform is historical; current service support is unknown.
- No throw ratio or battery operation is documented, so placement and cordless use cannot be assumed.
The key details
| Model covered | Beam V1 |
|---|---|
| Image format | 854 × 480 output |
| Rated light output | 100 lumens; measurement basis not stated |
| Placement | Fits E26/E27 light socket; throw distance not stated |
Performance figures are manufacturer claims. Source checked October 10, 2026. Regional models and included accessories can differ.
What the features mean for you
Does the light-socket format fit your room?
Beam V1's main distinction is its E26/E27 socket installation, which combines projection hardware with a light-bulb form factor. The specification sheet lists 110–240 V input and 9 W while projecting, with 3 W in standby. That can make the product interesting for a fixed overhead installation where the socket and projection surface already line up. It is not the same as a normal tabletop projector: the socket position fixes where the lens sits, and the manufacturer sheet does not state a throw ratio or supported distance chart. Measure the room and confirm the socket direction and projection geometry before treating the form factor as convenient.
What image detail and light output are documented?
The manufacturer identifies 854 × 480 output and a 100-lumen brightness claim. That pixel count is below HD, and the light figure is not labeled ANSI; avoid placing it alongside ANSI-rated projectors as if their numbers were measured in the same way. The sheet also gives 1,000:1 contrast and a 20,000-hour projection-life claim, but neither turns the V1 into a bright-room or fine-detail projector. A small, controlled-light image is the more cautious expectation. For slides, subtitles, or a room with ambient light, compare the native resolution and measurement basis with alternatives that have more headroom.
How should the Android description be read?
Beam's sheet describes an Android 4.2 computer, upgradeable to 4.4, with 8 GB of storage, Wi-Fi b/g/n, Bluetooth 4.0, and app installation. It also advertises AirPlay and Miracast in the context of that platform. Those are historical specifications, not proof that a current streaming service or application still works on a particular V1. A user considering the built-in computer should verify required services on the exact unit and check software update status. HDMI or another external source may be more dependable if the projector's connector configuration and the content device support the intended signal path.
What do audio and light-source facts add?
The sheet lists two 2 W speakers, which provide an integrated audio component, and describes the projection source as LED. It gives the projection light-source life as 20,000 hours, a manufacturer rating rather than a statement about how much service life remains in an older device. LED light does not require the same replacement-lamp planning as a conventional projection lamp, but the electronic assembly and cooling still need to work properly. The sheet does not establish optical lens shift, focus behavior, or a verified battery. Do not infer that a ceiling-socket projector can be moved around or aligned with the flexibility of a floor-standing unit.
Who should shortlist Beam V1?
The V1 is a niche option for a person who wants the projector and lamp form combined and can accept WVGA detail, a non-ANSI brightness claim, and old software. A conventional projector gives more known placement choices; a current smart projector is a safer route when present app support is central. Before purchase, confirm the exact V1 model, socket compatibility, wireless behavior, speaker operation, image focus, power draw, and any supplied remote or accessories. The available sheet establishes specifications for the model, not the condition or contents of a present offer. Treat the Amazon destination as a tagged model search and verify the exact seller's unit independently.
What else to compare
Choose a conventional portable projector for a movable battery setup, or a current smart model if supported streaming applications are more important than the socket form.
Before you buy
Is Beam V1 rated at 100 ANSI lumens?
The manufacturer sheet says 100 lumens but does not label the number as ANSI, so it is not entered as an ANSI rating.
Does the Beam V1 have a built-in rechargeable battery?
The sheet documents an E26/E27 socket power connection and does not document battery operation.
Will its Android software run today's streaming apps?
Current service compatibility is not established; the sheet describes Android 4.2, upgradeable to 4.4.
Where can I check the current price?
Use the Amazon link for current offers. Check the exact model, seller, product condition, delivery, and return terms. This page does not display a live price or confirm stock.
Sources & review basis
We use the following manufacturer documentation for the product features above. Our suitability notes and buying advice are editorial judgments based on those features, not measured performance results.
- Beam Labs Beam V1 specification sheet ↗ — checked October 10, 2026.
- Beam Labs exact-model V1 specification sheet ↗ — checked October 10, 2026.
The decision
Beam V1 is best understood as a socket-mounted projector-light experiment with documented low-resolution output and historical Android features. Confirm geometry, software, and exact-unit operation first.
Is it the right fit?
Check the exact model and today’s offers on Amazon.