Your next buying step
Ironmaster Super Bench PRO V2
Model: Super Bench PRO V2 (SKU 1001) · US configuration
Your choices from the finder
Review the product, then choose a seller
Compare offers for this model
Current Ironmaster Super Bench PRO V2 SKU 1001 with included three-position incline seat, one standard wheel set and handle. For this assessment scenario, its 47-by-21-in maximum projected rectangle is about 6.85 sq ft, it stands vertically, and the current package includes wheels. Ironmaster states 1,000 lb in flat position and 600 lb when inclined/upright; this comparison uses the lower documented rating. The scenario does not establish visitor intent, a continuous 6.85-sq-ft floor area or a movement-clearance guarantee.
Search this model on Amazon ↗Search results may include other models. Confirm the exact model, size and included accessories before ordering.
As an Amazon Associate I earn from qualifying purchases. Buying links on BuyerShortlists may be affiliate links.
Assessment scenario: Ironmaster Super Bench PRO V2: decline range, wheels and upright storage
Assessment scenario: flat, incline and decline; a 7-sq-ft maximum projected base envelope; at least a 600-lb conservative cross-position rating; upright storage; and included transport wheels. The current Super Bench PRO V2 SKU 1001 is the sole match in this snapshot. The 6.85-sq-ft rectangle is a conservative bounding envelope rather than continuous floor occupancy or workout clearance, and these selected limits do not prove the visitor's actual intent.
Explore this buying guide ↗Why consider this model?
- The current official page and product feed identify a distinct Super Bench PRO V2 U.S. bench, SKU 1001, not standard SKU 1003 or the discontinued earlier PRO model.
- Ironmaster lists 11 angles and flat, incline, decline and upright positions. The included three-position seat, dual-width 44-in pad and lower 17.2-in flat height are V2-specific documented features.
- A conservative projected envelope from the maker-listed 47-in overall length and widest 21-in foot is 6.85 sq ft, under this assessment scenario's 7-sq-ft ceiling. Unequal feet mean the whole rectangle is not continuously occupied; clearance is separate.
- The exact base offer includes one wheel set and a handle, and the maker states that the bench stands vertically. The optional Kickstand adds stability and pad protection but is not treated as included.
Tradeoffs to weigh
- Ironmaster's linked V2 manual says capacity including the user is 1,000 lb flat and 600 lb when tilted or the incline seat is used. The conservative finder threshold is 600 lb; this is not an independent test or proof of a common cross-brand rating protocol.
- The bench package does not include a leg restraint. Ironmaster says minimal decline is possible without an attachment and recommends the separate Crunch Situp attachment to help hold the legs.
- The bench weighs 65 lb without the seat and 69 lb with it. Wheels do not make it fold, and upright storage still needs suitable space; the 6.85-sq-ft envelope excludes use, doorway, rack and circulation clearance.
Check these before ordering
- Confirm the exact current Super Bench PRO V2 SKU 1001, its included seat, standard single wheel set and handle; do not confuse it with standard Super Bench SKU 1003 or an earlier Super Bench PRO.
- Confirm the intended-position capacity with Ironmaster and read the linked V2-specific instructions; ensure the foot lever is fully seated in the locking ring before use.
- If leg restraint is essential, verify the separate Crunch Situp package and current compatibility instructions rather than assuming decline position means an included catch.
- Measure actual exercise space, storage position, doorways and attachment clearance. A bounding rectangle is not a continuous-footprint or safe-clearance guarantee.