Your next buying step
VIAIR TLC PRO Compressor Kit (part 42046)
Model: TLC PRO / 42046 · US configuration
Your choices from the finder
Review the product, then choose a seller
Compare offers for this model
Assess the 42046 TLC PRO as an included-gun, clamp-powered manual kit for the selected vehicle-tire and twist-on Schrader scenario; its separate Presta head supports a different bicycle-valve route.
Search this model on Amazon ↗Compare the exact model, package, seller, current price and return terms. Search results can include other versions.
As an Amazon Associate I earn from qualifying purchases. This is an affiliate link.
Assessment scenario: Clamp-powered manual tire-gun kit with twist-on Schrader
A BuyerShortlists assessment scenario for someone requiring direct clamps, documented passenger-car use, an included Schrader connection and a twist-on chuck, without requiring preset automatic stopping. TLC PLUS and TLC PRO use manual trigger control and have different pressure, current and duty limits.
Explore this buying guide ↗Why consider this model?
- The exact 42046 page and manual document a direct 12V battery kit with a tire gun, 90-degree twist-on Schrader attachment, rebuildable Presta head and 30-foot coil hose.
- The selected arrangement documents vehicle-tire use and the required power/chuck route; the pressure gun is manually trigger-controlled.
Tradeoffs to weigh
- It does not stop at a user-selected tire target; the compressor’s automatic tank cutoff is not an automatic tire-pressure stop.
- The manual specifies 150 PSI maximum working pressure, 33% at 100 PSI/72°F and 30A maximum draw with a recommended 40A fuse.
- The reviewed exact source set does not establish a tire-size capacity or a numeric tire fill-time result for a particular vehicle.
Check these before ordering
- Confirm the offer is TLC PRO / part 42046 with the intended clamp or terminal-ring leads, tire gun, Presta head, Schrader attachment and hose.
- Confirm the vehicle-side 12V circuit, 30A draw and recommended 40A fuse; run the engine as the manual directs.
- Do not treat the 160-PSI gauge scale as the compressor’s limit or a tire target; observe the 150-PSI working ceiling and the tire’s own pressure instructions.
- Allow the manual’s duty cycle/rest period and keep the hot unit ventilated and protected from the elements.