BuyerShortlistsBack to Tire Inflator Scout

Your next buying step

Slime Rugged Digital Tire Inflator 40047

Model: Rugged Digital Tire Inflator / 40047 · US configuration

Slime Rugged Digital Tire Inflator 40047 with digital target display, hose and 12V vehicle plug
Manufacturer product image · Slime

Review the product, then choose a seller

Compare offers for this model

Consider the 40047 only for a socket-powered passenger-car plan with a verified 15A-capable outlet, user-selected stop and enough reach for your setup. Its 10-foot cord plus 2-foot hose gives 12 feet of stated reach; no working-pressure ceiling or accuracy tolerance is documented.

Search this model on Amazon ↗

Compare the exact model, package, seller, current price and return terms. Search results can include other versions.

As an Amazon Associate I earn from qualifying purchases. This is an affiliate link.

Assessment scenario: 15A-capable socket-powered car top-off with preset stop

A source-based assessment for a driver with a confirmed 12V accessory outlet rated at least 15A, who can run the engine, wants user-selected stopping and accepts the exact model’s short hose and run/cool limits. The maker’s four-minute figure applies only to its named P205/55R16, 0-to-35-PSI scenario; this does not certify tire or vehicle compatibility.

Explore this buying guide ↗

Why consider this model?

  • The exact 40047 page/manual documents a 12V accessory outlet, passenger-car tire route, press-on tire head and Inflate-Right selected-pressure stopping.
  • Its package marks car use, and its manual specifies a 10-foot lead, 2-foot hose and 12-foot total reach.
  • Its ball needle and separate ball route do not make this car-tire scenario a universal fit or pressure guarantee.

Tradeoffs to weigh

  • The manual requires an outlet rated at least 15A, recommends a running engine and warns against older 8A outlets; it also says not to start the vehicle while the pump is plugged in.
  • Operation is limited to 10 minutes followed by about 25 minutes cooling; the manual says not to leave it unattended.
  • The 0–99 PSI display is not a working-pressure rating or gauge-accuracy statement; no maximum working pressure is established. The page/manual green-lever lock directions conflict.
  • The four-minute claim is one P205/55R16 0–35 PSI maker scenario, not an independent result or general fill-time forecast.
Check these before ordering
Manufacturer information