Your next buying step
Slime 12V Digital Tire Inflator 40088
Model: 12V Digital Tire Inflator / 40088 · US configuration
Your choices from the finder
Review the product, then choose a seller
Compare offers for this model
Review Slime 40088 for a preset-stop passenger-car setup only after confirming a 15A-rated 12V outlet, a suitable running-engine arrangement and the exact press-on head. The selected stop does not establish gauge accuracy or a maximum working-pressure rating.
Search this model on Amazon ↗Compare the exact model, package, seller, current price and return terms. Search results can include other versions.
As an Amazon Associate I earn from qualifying purchases. This is an affiliate link.
Assessment scenario: Assessment scenario: Slime 40088 socket-powered preset car-tire inflation
This source-based assessment scenario—not the visitor's actual intent—covers a passenger-car setup with a confirmed 15A-capable 12V accessory outlet, press-on tire head and user-selected target stop. The vehicle engine-running and cooldown directions still apply; the lever-lock directions conflict between page and manual.
Explore this buying guide ↗Why consider this model?
- The product-specific manual documents a 12V accessory-outlet plan and requires the outlet to be rated at least 15A; it recommends running the engine while pumping.
- Inflate-Right provides a user-selected tire-pressure stop according to the exact page and manual, and the manual identifies a 10-foot power cord with 12 feet total reach.
- The manual lists 0.75 CFM at 0 PSI and a six-minute example for a P205/55R16 tire from 0–35 PSI. These are published specifications and a maker scenario, not independent testing.
Tradeoffs to weigh
- The digital display is marked 0–99 PSI, but that range is not a maximum working-pressure rating; no gauge-accuracy tolerance or current draw is reported.
- The product page says lift the green hose lever to lock, while the manual says push it down to lock. The exact supplied head and matching instructions must be checked.
- The manual limits continuous use to 10 minutes with about 25 minutes cooling and says the inflator should not be left unattended; engine running is recommended.
- The package graphic marks cars, off-road, bicycles and balls/inflatables but not trucks/SUVs or rafts/mattresses. This is not proof of compatibility with every tire in a marked category.
Check these before ordering
- Confirm the exact Slime 12V Digital Tire Inflator part 40088, not the cordless 40084 or a seller-created kit with different contents.
- Verify the actual vehicle accessory outlet is rated at least 15A; do not mistake the 15A plug fuse for a current-draw figure or assume any cigarette lighter socket is adequate.
- Plan the cord path, engine state and cooling breaks using the manual; follow the exact supplied hose-head instructions because the green-lever directions conflict.
- Set the target from the vehicle's recommended cold pressure, not the 0–99 display range, and verify final pressure with a suitable gauge if accuracy matters.
