Your next buying step
Makita 12V max CXT Inflator, Tool Only (MP100DZ)
Model: MP100DZ · US configuration
Your choices from the finder
Review the product, then choose a seller
Compare offers for this model
The exact MP100DZ page identifies a current-reference tool-only configuration with no battery or charger. The shared manual gives the operating range and safety boundaries; this is not an internal-battery pump or a 12V accessory-socket inflator.
Search this model on Amazon ↗Compare the exact model, package, seller, current price and return terms. Search results can include other versions.
As an Amazon Associate I earn from qualifying purchases. This is an affiliate link.
Assessment scenario: Makita MP100DZ CXT tool-only car-tire assessment
Assessment scenario—not a statement of the visitor’s intent—for an attended passenger-car tire task using the documented MP100D pump body, a Schrader clamp, and selected-pressure stopping, with power left open because the questionnaire has no removable CXT-pack option.
Explore this buying guide ↗Why consider this model?
- Makita identifies this exact configuration for car/light-truck tire inflation, and the MP100D manual documents its press-on clamp procedure for Schrader valves.
- The exact product page advertises stopping at the selected pressure, and the shared manual explains target setting and stop behavior for the tire procedure.
- The manual-supported pump plan allows five minutes of operation followed by five minutes off for cooling; it requires an attended operator and a final check with reliable calibrated equipment.
Tradeoffs to weigh
- Makita’s product page states 120 PSI, while the manual specifies 830 kPa / 121 PSI maximum and selectable targets from 3 to 121 PSI. These are equipment limits, not a recommended tire or ball pressure.
- No numeric gauge tolerance, tire-size envelope, measured fill time, airflow rate, or battery-yield figure is published in the reviewed sources. The manual warns the English-valve-adapter procedure does not provide an accurate gauge reading.
- The five-minute on / five-minute cooling schedule is a duty boundary, not a performance promise. Never leave inflation unattended; verify final pressure with a reliable calibrated gauge.
- This exact DZ offer is tool-only: the product page excludes the battery and charger. A compatible CXT pack and suitable charger must be obtained separately; the finder does not screen that power-system requirement.
- The page feature copy says 25-1/2 inches for the hose; the related kit page gives a 25-inch specification-table value while repeating 25-1/2 inches in its feature copy. Do not rely on a normalized hose measurement.
Check these before ordering
- Match the exact MP100DZ or MP100DWRX1 model number, not a related DMP180/DMP181 Makita model or an unverified bundle.
- For MP100DZ, confirm separately supplied compatible CXT battery and charger; for MP100DWRX1, verify the seller’s exact written kit contents against Makita’s list.
- Use the vehicle placard or owner manual for the recommended cold tire pressure; neither 120 PSI nor 121 PSI is a target recommendation.
- Follow the manual’s five-minute-on / five-minute-off schedule, remain present, and independently verify final pressure with a reliable calibrated gauge.