Your next buying step
Makita 18V LXT Inflator Kit (1.5Ah) (DMP180SYX)
Model: DMP180SYX · US configuration
Your choices from the finder
Review the product, then choose a seller
Compare offers for this model
Assess the exact DMP180SYX 18V LXT kit for a car tire using the documented Schrader press-on clamp and preset-pressure stop. Makita lists one removable 1.5Ah battery and DC18SD charger; the pump body's page/manual maximum is 120/121 PSI with a five-minute-on/five-minute-off cooling schedule. This is a fixed assessment scenario, not a compatibility or stock claim.
Search this model on Amazon ↗Compare the exact model, package, seller, current price and return terms. Search results can include other versions.
As an Amazon Associate I earn from qualifying purchases. This is an affiliate link.
Assessment scenario: Assessment scenario: DMP180SYX kit for a car tire with press-on Schrader and preset stop
A fixed source-based assessment of the exact DMP180SYX current-reference kit for documented passenger-car tire use with a Schrader press-on clamp and target-pressure stopping. The kit lists a removable 1.5Ah LXT battery and DC18SD charger; the 120 PSI product-page and 121 PSI manual figures are equipment ceilings, not tire targets. The manual specifies five minutes on followed by five minutes off.
Explore this buying guide ↗Why consider this model?
- Makita's exact DMP180SYX US page identifies car/light-truck tire use, selected-pressure stopping and a 25½-inch hose.
- The matching DMP180 manual shows the Schrader chuck clamp folded over the valve stem and separately describes the Presta adapter and ball needle.
- The exact SYX package page lists a removable 1.5Ah 18V LXT battery and DC18SD charger, distinguishing this kit from the DMP180ZX tool-only configuration.
Tradeoffs to weigh
- The kit battery is a removable tool-platform pack, not an internal inflator battery; no 12V socket, clamps or 7-way trailer setup is documented.
- The product page says 120 PSI and the manual lists 830 kPa (121 PSI); this is not a tire target. The manual requires a five-minute cooling pause after each five-minute continuous run.
- No tire-size envelope, repeatable fill time, battery yield or numeric gauge tolerance is published. Remain present and verify pressure with a reliable calibrated device.
Check these before ordering
- Confirm the exact DMP180SYX kit suffix; do not substitute the tool-only DMP180ZX listing.
- Verify the exact offer includes one 1.5Ah removable LXT battery, DC18SD charger, Presta adapter, sports-ball needle and tapered adapter.
- Use the vehicle maker's cold-pressure target, observe five minutes on/five minutes off, supervise use and verify the result independently.
