Finnex HPC-200 digital glass aquarium heater

Exact-model photograph is not verified. Text-only reference page. Finnex's shared HPC-series photo is generic across 100/200/300 W options and does not identify the selected 200 W assembly or seller package; no exact HPC-200 product photograph is presented here.

Finnex lists the 200 W HPC-200 for 60–80 US gallons, with a 12-inch heater length and a 68–92°F control range. The 60-gallon lower boundary cannot be enforced by this site's maximum-only finder, so this is an exact-model lookup rather than a tank-fit recommendation. Its 80-gallon endpoint meets—but does not erase the differences from—the separate 300 W HPC-300 row.

Search results may include other models. Confirm the exact model, applicable region, condition and included parts before ordering.

As an Amazon Associate I earn from qualifying purchases.

Read the detailed model assessment · Find products for my needs

Documented model details

• Finnex's Shop option identifies HPC-200 / 200 Watts as SKU HPC-200 and UPC 850006562251; the official manual has a separate HPC-200 row.
• That manual row lists 200 W, a 60–80 US-gallon band, 1.35 A at a 115 V reference, a 68–92°F control range, and a 12-inch heater length. The 80-gallon endpoint is also the lower endpoint of the distinct 300 W HPC-300 row, which is listed at 13.75 inches and 2.70 A at 115 V.
• Finnex's family page describes 2 mm quartz glass behind a protective guard, cord-mounted digital display/adjustment, a remote temperature sensor, setting memory, and a sensor power cut-off when the sensor is exposed to air. It says the sensor should be cleaned and checked every 30 days and that the heater must operate above 150 ppm TDS; the page does not name freshwater or saltwater approval.

Limits to weigh

• The manual's 60-gallon minimum cannot be enforced by the current maximum-only volume rule. This lookup identifies the configuration but is not a recommendation for a particular aquarium.
• The 1.35 A figure is tied to a 115 V reference; the reviewed sources do not establish the complete voltage range, frequency, plug, or certification. Check the actual unit's electrical label.
• Finnex's above-150-ppm TDS operating condition is documented, but the inspected HPC sources do not specify freshwater or saltwater approval or provide the complete immersion, orientation, clearance, mounting, or inline-installation instructions. The sensor cut-off is not permission to run the heater dry.
• The official Shop assigns the same generic family photograph to 100, 200, and 300 W choices; it does not identify an HPC-200-specific package or assembly. This reference page is text-only.
• An exact Amazon product page and seller package have not been verified for this model. The central action is a model search, not a link to a confirmed listing; check any result rather than assuming a search result is the specified unit.

Check before ordering

• Confirm that the listing and unit identify Finnex HPC-200 / 200 W; the manufacturer's Shop record associates this option with UPC 850006562251. Do not substitute HPC-100 or HPC-300.
• Read the full 60–80 US-gallon band, including its 60-gallon lower endpoint; the public finder cannot apply that floor and does not present this as a match.
• Check the actual unit's complete voltage/frequency label and exact supplied installation instructions. The manual's 1.35 A at 115 V entry alone is not a complete electrical or setup specification.
• Check the stated above-150-ppm TDS condition and follow Finnex's 30-day sensor cleaning/function-check direction. Use an independent thermometer to verify actual aquarium water rather than treating the display/control claims as measured performance.
• The exact Amazon listing was not verified. Treat the central button as an HPC-200 model search, then verify the result's model, region, condition, seller, package contents, and return terms before ordering.