Model reference
Finnex HMA-500s 500 W Titanium Aquarium Heater
Model: Finnex HMA-500s Titanium Aquarium Heater, 500 W (exact wattage row; retail SKU/UPC unverified)
The official HMA family page supplies the exact model row and family-level features; it is not a complete Finnex catalogue. The checked instruction index lists HMH, HMS, and HPC manuals but no HMA entry, and the 2026-10-31 Shop collection capture omits HMA from its ten displayed cards. These bounded omissions do not prove the HMA-500s is discontinued. This lookup is not a current seller offer, electrical approval, or individual aquarium suitability assessment.
This model lookup is separate from the questionnaire shortlist. It does not certify that this model meets your selected requirements.
Exact-model photograph is not verified. Text-only reference lookup. The official HMA family image visually shows a tube, controller, and guard, but no 500 W/model label or exact package identity; the existing review’s family-scope image is not an exact HMA-500s assembly.
Finnex’s HMA table identifies the HMA-500s as its 500 W row, rated for 100–120 US gallons with 68–92°F control and 4.5 A at a 115 V reference. The current matcher cannot enforce the 100-gallon floor, and the reviewed sources do not establish a complete electrical rating, HMA installation instructions, or a current retail package, so this remains an identification reference rather than a tank-fit match.
Search this model on Amazon ↗Search results may include other models. Confirm the exact model, applicable region, condition and included parts before ordering.
As an Amazon Associate I earn from qualifying purchases.
Read the detailed model assessment · Find products for my needs
Documented model details
- Finnex’s HMA table names HMA-500s at 500 W and 4.5 A at 115 V, with a 68–92°F family control range and a 100–120 US-gallon band. It identifies a separate HMA-300s row at 300 W and 80–100 gallons; the published ranges meet at 100 gallons, which does not establish which model is appropriate for a particular tank.
- The family table footnote limits its rating context to a standard enclosed aquarium and states maximum heating capacity of ±8°F above ambient room temperature. This manufacturer sizing statement is not a room-specific temperature guarantee or a performance test.
- Finnex describes HMA control as precision analog in its overview and also uses “electronic control” in descriptive copy; the wording is retained as ambiguous, not split into two control modes. The page claims ±2°F around the setting, which is a manufacturer statement rather than measured aquarium-water stability.
- The HMA family page describes a titanium tube, heater guard, LED indicator, adjustable dial, and freshwater/saltwater use. Those family claims do not establish the exact HMA-500s retail package or its installation requirements.
- The captured Finnex instruction index lists manuals for HMH, HMS, and HPC but no HMA manual. HMH is a distinct family, so its installation, control, and safety directions are not transferred to the HMA-500s.
- The 4.5 A figure is tied to a 115 V reference; the reviewed HMA sources do not provide a full allowed input-voltage range or frequency. The exact model’s SKU/UPC, package, body dimensions, clearance, and complete setup arrangement also remain unverified.
- The 2026-10-31 official Shop collection capture displayed ten cards without a visible second-page control and did not identify an HMA offer. That bounded collection result is not a full Finnex catalogue or discontinuation finding.
Limits to weigh
- The manufacturer’s stated 100–120 US-gallon band has a meaningful 100-gallon lower boundary. The current finder can enforce only a maximum volume, so the HMA-500s remains reference-only and must not match a tank merely because it is under 120 gallons.
- The sizing band and ±8°F-above-ambient footnote are manufacturer statements for a standard enclosed aquarium, not a calculated recommendation for a particular room, tank cover, target temperature, or livestock.
- The page does not establish the complete electrical nameplate, permitted supply, frequency, installation or clearance directions. Verify the actual HMA-500s label and its own instructions before electrical or installation decisions; do not infer suitability from amperage at 115 V.
- The reviewed manufacturer instruction index does not list an HMA manual. This bounded index result does not prove that no such instructions exist, and no HMH or other-family directions are substituted.
- No exact HMA-500s wattage/package photograph was verified. The inspected official family photo shows a titanium tube, separate controller and guard but no wattage/model label or selected-package identity; it is not represented as the 500 W assembly.
- The retained exact-model Amazon search returned HTTP 503 before result cards or product details were visible. No ASIN or package identity was established; the blocked request is not evidence that a listing does not exist.
Check before ordering
- Check that the product label, selected variation, and carton explicitly identify Finnex HMA-500s / 500 W. Do not substitute HMA-300s or another Finnex titanium-heater family.
- Check the complete 100–120 US-gallon range, including its 100-gallon minimum, against the actual aquarium and conditions. Do not treat the table as a performance guarantee or choose between the HMA-300s and HMA-500s from the shared boundary alone.
- Read the actual unit’s full electrical nameplate and HMA-specific instructions. The family row’s 4.5 A at a 115 V reference does not specify the allowed input range, frequency, circuit requirements, immersion, position, or clearance.
- Verify the actual seller package, guard/controller arrangement, cord, and return terms rather than assuming every family-level feature appears in an unverified offer.
- The saved route is a full-model Finnex HMA-500s search, not an exact-listing promise. Verify the model and package on the destination; do not accept an HMA-300s or sibling configuration as equivalent.