Model reference
Aqueon Pro Adjustable Heater 100 W
Model: Pro Adjustable Heater 100 W (manual AP100W-H; Item 100532084; UPC 015905000581)
US Aqueon Pro Adjustable Heater 100 W, identified by the family selector and 2025 catalog as item 100532084 / UPC 015905000581 and by the linked instruction manual’s AP100W-H 100 W row. This is a document-based model reference; it does not establish a particular seller’s region, present offer contents, or fit with the site’s questionnaire.
This model lookup is separate from the questionnaire shortlist. It does not certify that this model meets your selected requirements.
Exact-model photograph is not verified. This reference lookup is text-only. The full model review carries Aqueon’s exact 100 W / item 100532084 / UPC 015905000581 carton photograph; it identifies the package, not installed scale or heater performance.
Aqueon’s exact Pro 100 W manual row recommends 15–40 US gallons, while its 2025 US catalog and matching carton say up to 30. The adjustable 68–88°F control and full-submersion instructions help identify the model, but the site’s matcher cannot enforce the manual’s 15-gallon minimum.
View this model on Amazon ↗Confirm the exact model, package quantity, condition, included parts and current seller terms before ordering.
As an Amazon Associate I earn from qualifying purchases.
Read the detailed model assessment · Find products for my needs
Documented model details
- Aqueon’s exact AP100W-H manual row lists 15–40 US gallons and a 10.3-inch overall length. The 2025 catalog identifies item 100532084 / UPC 015905000581 as Pro 100 / 100 Watt, up to 30 gallons, and separately lists item and package dimensions; those are differently labelled measurements, not installation clearance.
- The US family selector describes 68–88°F adjustment and an electronic thermostat stated by Aqueon to be accurate within ±1°F. The manual recommends checking a reliable thermometer and allowing 24 hours before reassessing an adjustment; the light indicates active heating rather than a water-temperature reading.
- Aqueon describes the Pro as suitable for fresh- or saltwater use and fully submersible. The manual permits vertical placement only above its marked minimum water level, or horizontal placement only when fully submerged; it calls for water circulation and at least 30 minutes submerged before power.
- The exact UPC-specific manufacturer carton identifies Pro 100 / 100 Watt and states up to 30 gallons. It confirms the package variant, not installed scale or heating performance.
Limits to weigh
- The 15-gallon manual minimum is a real boundary that the current max-only aquarium-volume matcher cannot enforce; this assessment is therefore reference-only, not a finder match or purchase recommendation.
- The manual’s 15–40-gallon recommendation and the 2025 catalog/carton’s up-to-30-gallon claim conflict at the upper end. They are preserved as separate manufacturer statements, not reconciled into a new guarantee; actual heating also depends on conditions such as room temperature and heat loss.
- The reviewed material does not establish a selectable temperature increment, independently measured thermostat accuracy, or a digital display of aquarium-water temperature. The ±1°F figure is Aqueon’s specification, not a test result.
- The manual’s overall length and catalog item/package dimensions do not state required mounting clearance. The reviewed sources do not document inline or external-filter installation for this model.
Check before ordering
- Match the offer and carton to Aqueon Pro 100 W, manual model AP100W-H, item 100532084 and UPC 015905000581; do not substitute the adjacent 50 W or 150 W version.
- Compare the exact manual’s 15–40-gallon recommendation with the 2025 catalog/carton’s up-to-30-gallon claim. If your intended setup depends on the disputed upper range, confirm the current model-specific guidance with Aqueon rather than treating this reference as a suitability decision.
- Check the actual unit label and exact instructions for 120 V / 60 Hz operation, minimum water line, mounting position and safe placement. Keep it submerged, allow circulation, wait at least 30 minutes before powering it, use a drip loop and never run it dry.
- Measure the intended space against the installed unit and mounting arrangement. Do not treat the carton dimensions or the manual’s 10.3-inch overall length as promised clearance.
- Use a separate reliable aquarium thermometer and allow the manual’s stated 24-hour settling interval after an adjustment; do not interpret the red heating indicator as a water-temperature display.