Aqueon Preset Heater 150 W

Exact-model photograph is not verified. No photo is attached to this separate model-reference lookup. The source review retains the exact UPC-mapped Aqueon 150 W package image (SHA-256 4dff88106e7d36eca5b65a886e7a0097089822a5fc44431bede990d48c99dfb1); it identifies the pictured package, not seller stock, installed clearance, scale or heater performance.

Aqueon’s 150 W Preset Heater is the US PS150H (Item 100106253 / UPC 015905062534): the exact manual recommends 30–55 US gallons, while the current page and catalog give a 55-gallon ceiling. Its fixed 78°F control and two-cup mounting are useful distinctions, but the finder cannot enforce the manual’s 30-gallon floor, so this is a model reference—not a finder match.

Search results may include other models. Confirm the exact model, applicable region, condition and included parts before ordering.

As an Amazon Associate I earn from qualifying purchases.

Read the detailed model assessment · Find products for my needs

Documented model details

• The current variant record identifies 150 W as SKU 100106253 / UPC 015905062534; the 2025 US catalog repeats that item/UPC pair, and the exact manual calls its 150 W row PS150H.
• The exact PS150H manual recommends 30–55 US gallons. The current product page and 2025 catalog table state an upper rating of 55 gallons, and Aqueon’s general 150 W chart also shows 30–55 gallons. Agreement among these labels is not a heat-performance guarantee for a particular room, target or aquarium.
• The manual identifies 120 V / 60 Hz power, a 7.25-inch overall heater length and two suction cups. It requires water above the marked line when mounted vertically or full submersion horizontally, unobstructed heating area, circulation, the bottom rubber guard and a 30-minute submerged wait before connection; it forbids dry operation.
• The exact variant page and package describe a fixed 78°F preset with no adjustment, a manufacturer-stated ±1°F accuracy and a red light while heating. The light indicates heating, not measured water temperature, and the accuracy statement is not an independent measurement.
• The package labels fresh- or saltwater use and describes shatter-resistant quartz glass, automatic shut-off and overheat protection. ‘Shatter-resistant’ is not the questionnaire’s stronger shatterproof claim, and the safeguards do not permit operation out of water.
• The current-page and catalog 3.5 × 1.5 × 9.25-inch figures describe the retail package, not installation clearance. The manual’s 7.25-inch overall heater length is the distinct body measurement; measure the real mounting space and orientation.

Limits to weigh

• The PS150H’s exact manual minimum is 30 gallons, but the current finder can test only an operating plan’s maximum. The model stays reference-only so it is not returned for undersized aquariums.
• The 78°F preset cannot be adjusted. Aqueon’s ±1°F statement is a manufacturer claim, not a tested whole-tank temperature; confirm the intended species’ needs and check actual water with an independent thermometer.
• Aqueon calls the body shatter-resistant rather than shatterproof. The reviewed sources do not turn that wording into an unbreakable-body claim or make the heating light a temperature display.
• A 55-gallon upper rating does not guarantee performance under every room-temperature difference, circulation pattern, cover or setup. Follow the exact manual rather than treating the label as a heating calculation.
• No current seller offer, stock or delivered package is established. The dated Amazon US audit did not verify an exact listing after a 503 before results and identity details; that is not evidence the product is absent.

Check before ordering

• Match Aqueon Preset Heater 150 W / PS150H / Item 100106253 / UPC 015905062534; do not substitute the separate 100 W or 200 W units. Confirm the actual unit’s 120 V / 60 Hz label.
• Use the PS150H manual’s complete 30–55 US-gallon recommendation, not only the 55-gallon ceiling. This reference is excluded from the finder because its lower range edge cannot be enforced there.
• Check that a fixed 78°F setting suits the livestock and use an independent aquarium thermometer. The stated ±1°F accuracy is not a measured reading throughout the tank.
• Follow the model-specific placement instructions: keep water above the marked line vertically or keep the unit fully submerged horizontally, leave the heating area uncovered, maintain water circulation, retain the bottom rubber guard and wait 30 minutes submerged before powering. Do not operate dry; use a drip loop and disconnect before service.
• Allow for the manual’s 7.25-inch overall heater length, two-cup mount and cord route. Do not use the larger retail-package dimensions as body clearance; verify the exact item, instructions and offered carton before ordering.