Model reference
Aqueon Submersible Glass Heater 50 W
Model: Submersible Glass Heater 50 W (TA50; Item 100528680; UPC 015905000291)
Current US family-selector/package configuration, identified as Item 100528680 / UPC 015905000291 and manual model TA50. The manual gives 50 W, 120 V / 60 Hz and the 5–20-gallon recommendation. This source-based reference does not confirm a seller’s current package or guarantee heating results in a particular setup.
This model lookup is separate from the questionnaire shortlist. It does not certify that this model meets your selected requirements.
Exact-model photograph is not verified. The full review shows Aqueon’s exact 50 W / UPC 015905000291 package image with the heater visible through the carton window. It is an identification reference, not an installed-scale or performance photograph.
The TA50 is Aqueon’s 50 W adjustable Submersible Glass Heater, with an exact manual recommendation of 5–20 US gallons and an upper rating of 20 gallons also shown in the current catalog and package. The 5-gallon lower boundary is material: the current volume matcher cannot enforce it, so this is an identification reference rather than a finder or purchase match.
View this model on Amazon ↗Confirm the exact model, package quantity, condition, included parts and current seller terms before ordering.
As an Amazon Associate I earn from qualifying purchases.
Read the detailed model assessment · Find products for my needs
Documented model details
- Aqueon’s current family selector maps 50 W to Item 100528680 and UPC 015905000291; the exact instruction row names TA50. The manual specifies 120 V / 60 Hz.
- The exact TA50 manual recommends 5–20 US gallons. The current product page, exact UPC package and 2025 catalog state up to 20 gallons; the shared upper limit does not erase the manual’s 5-gallon lower boundary.
- The family page describes an adjustable electronic thermostat from 68–88°F in 1°F setting increments, a heat-on indicator, freshwater/saltwater use and a shatter-resistant quartz-glass body. Those are manufacturer statements, not independent accuracy or impact tests.
- The manual specifies fully submerged in-tank use, a marked waterline for vertical mounting, full submersion when horizontal, circulation, and a 30-minute submerged wait before power. It recommends waiting 24 hours at the original setting before making an adjustment.
- The TA50 manual calls 9.0 inches the overall length. The catalog separately lists item dimensions of 1.375 × 1.375 × 8.75 inches and package dimensions of 3.875 × 1.5 × 9.5 inches; the product page also has a separate unlabeled dimension set. These are not interchangeable clearance measurements.
Limits to weigh
- The finder’s numeric condition checks only a product maximum, not the TA50 manual’s 5-gallon minimum. The heater therefore remains reference-only instead of being shown for tanks below the stated lower recommendation.
- Aqueon says shatter-resistant, not shatterproof; no independent impact test, water-temperature accuracy test or heating-performance result is established here.
- Tank volume alone does not determine whether 50 W will reach a chosen temperature: room-to-water temperature rise, circulation, cover and livestock requirements remain important.
- The exact package image identifies the 50 W / UPC variant but does not prove a seller’s delivered package, installed size or performance. The manual requires a rubber guard; whether one is included in a particular offer should be checked.
Check before ordering
- Compare the carton and listing against TA50, 50 W, Item 100528680 and UPC 015905000291; do not rely on a wattage-only family name.
- Check the actual unit’s electrical label and supplied instructions. Confirm the tank is within the manual’s 5–20 US-gallon recommendation rather than treating 20 gallons as a minimum or performance promise.
- Allow for the manual’s overall length and marked waterline, while keeping package and catalog item dimensions distinct; verify actual mounting clearance and full submersion.
- Follow the manual’s circulation, submerged-wait, adjustment and maintenance directions, and verify water temperature independently with a suitable thermometer.