Model reference
AquaTop TTH-1000 Hercules 1000 W Titanium Aquarium Heater with Controller
Model: TTH-1000
A US-facing exact-model page and the Hercules TTH manual identify the TTH-1000 / 1000 W setup for fresh or salt water, fully submerged in a glass aquarium or sump with water movement and used with the matching controller. Exact voltage, frequency and numeric setting limits are not stated in those sources. This is a model reference, not confirmation of a seller’s item, region, package or fit to visitor-selected conditions.
This model lookup is separate from the questionnaire shortlist. It does not certify that this model meets your selected requirements.
Exact-model photograph is not verified. This model-reference lookup is text-only because the original TTH-1000 package/heater image is registered under the source review’s products/images directory, not as a root-level file accepted by this adapter. The source review retains the inspected model-associated image; it is for identification only, not scale, electrical or performance proof.
The AquaTop TTH-1000 is the 1000 W member of the Hercules titanium-tube line, supplied in the source description with a dual-display digital controller and separate sensor. AquaTop’s product page describes a 200–300 US-gallon band and up to 300 gallons, while its linked manual lists 200 gallons maximum; this review keeps the conflict visible and does not certify questionnaire compatibility.
Search this model on Amazon ↗Search results may include other models. Confirm the exact model, applicable region, condition and included parts before ordering.
As an Amazon Associate I earn from qualifying purchases.
Read the detailed model assessment · Find products for my needs
Documented model details
- The exact product page describes 200–300 US gallons and states an up-to-300-gallon technical maximum; the manual’s model table gives TTH-1000 a 200-gallon maximum. The existing fact uses 200 gallons as a conservative screening ceiling, not a stated minimum or a guarantee of heating performance.
- AquaTop describes an included digital controller with separate water- and set-temperature displays, adjustable settings, high/low audio alerts and a dual-relay overheat interlock. Its ±1.8°F accuracy is a manufacturer claim, not an independent measurement, and no numeric setpoint endpoints are documented.
- The manual calls for full immersion above the marked minimum water level, a glass aquarium or sump with water movement, the matching controller kept dry, a drip loop and waiting at least 30 minutes after unplugging before moving or cleaning the heater.
Limits to weigh
- The page’s 200-gallon lower suitability boundary cannot be represented by the current upper-limit-only matcher, and the page/manual maximums conflict; the model therefore remains reference-only rather than an active questionnaire recommendation.
- The reviewed exact page and manual do not state voltage, frequency, controller setpoint endpoints, minimum tank volume or body dimensions. No physical nameplate was checked; do not infer electrical compatibility from another AquaTop model or the product photo.
- A tank rating does not account for room-to-water temperature difference, cover, insulation, circulation or livestock requirements. The controller accuracy and relay descriptions are maker claims, not test results.
Check before ordering
- Confirm the offer and carton identify TTH-1000 / 1000 W, not TTH-1500, TH-C800 or the separate first-generation TH-800W/DDC-800 bundle.
- Check the actual unit’s voltage/frequency label and confirm the supplied controller and separate sensor match the current instructions; the retained image does not establish the seller’s delivered package or electrical rating.
- Before ordering, verify that the glass aquarium or sump, water movement, full-submersion depth, dry controller location and electrical circuit meet the manual’s instructions; consult a qualified electrician about the high-power load if needed.